High Sensitivity Single Loop / Channel Vehicle Detector for Parking Access Control

High Sensitivity Single Loop/Channel Vehicle Detector for Parking Access Control

Specifications
Compatible with parking management system
Easy installation and operation
Factory price and fast shipping

Introduction:
Single/double vehicle loop detector is used for wherever vehicles have to detected.
For example for monitoring and safe-guarding accessways or for counting vehicles.
The output singnal can be used for controlling door and barrier gate drive mechanisms, operation barriers,
controlling traffic light system or activaticing card dispensers in parking management system.
 connects one inductive loop (single channel)
 connects two indutive loop (double channel)

Application Scope

Parking lot entrances Vehicle detection

Parking lot space information acquisition system

Electronic police traffic lights snap shot system

Traffic monitoring system

Standard Features:

1) Reset Switch : The reset switch enables the detector to be manually reset during

commissioning and testing . This results in the detector re-tuning the sensing loop and

becoming ready for vehicle detection

2) Selectable Pulse Time : This feature sets the length of time that the pulse relay will be

energized for 1 Second or 0.5 Seconds

3) Pulse Relay Selection : The Pulse Relay may be configured to energize on detection of a

vehicle or when the vehicle leaves the loop

4) Sensitivity Boost : This feature sets the undetect level to maximum sensitivity and is used

to prevent loss of detection of high-bed vehicles

5) Switch Selectable Sensibility : 4 sensitivity setting are available on the switches to allow

flexibility in configuration

6) Switch Selectable Frequency : 4 frequency settings are available to prevent cross-talk

between adjacent loops

7) Filter Option : This option is used to provide a delay between detection of the vehicle and

switching of the output relay . This relay is normally used to prevent false detection of

small or fast moving objects

8) Permanent Presence Option : This feature ensure detection of the vehicle will be maintained

when the vehicle is parked over the loop for extended periods .

Technical parameters:

Model :MX-410

Single channel loop detector

Dimension: L110mm x W37mm x H75 mm

Power supply: DC12V/DC24V or AC220V/AC110V for optional

Power consumption: 5W as default

Output Mode: Two relay

Output signal type: exist pulse

Frequency Adjustment: 2

Operating temperature: -30 degree to 70 degree

Operating frequency: 20KHz to 170KHz

Installation: DIN lead rail, Connection: 11-PIN socket

Loop connection wiring: max x 100m, twisted at least 20 times per meter

Total resistance: less than 10ohm

Automatic calibration time: 2s to 5s

Sensitivity:3 grades adjustable

Reaction time: 10ms (fastest)

Shell: PC+ABS engineering plastics

Net weight: 200g