Results forp1322 spo2 finger probefrom 3865 Products.
|
|
Test Rubber Ball Usage rubber ball used for dynamic stability testing to UL (USA) standards. A ball, 2 and 3/4/16 inch diameter (2.187 inches), filled with No. 60 core sand. It is ...
|
|
|
|
|
UL Standard / IEC 62368 -1-Figure V.1 Heat-treated steel Steel Jointed Test Probe Simulating Human Finger Movement Application: This jointed Test Finger Probe is strictly designed ...
|
|
|
|
|
Test probe similar to test probe B of IEC 61032 with circular stop face Ø50 mm , IEC 60335-1 Test probe B According to IEC60335-1- clause 20.2. Test probe similar to test probe B ...
|
|
|
|
|
UL 60335-2-24 Figure 101.DVA.2 Articulate probe with flat and cone shaped hand 10.5 – 11.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with ...
|
|
|
|
|
CSA C22.2 No.47-13 Figure 1 Articulated Probe The UL Metal Articulated Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. ...
|
|
|
|
|
UL Test Probes UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of ...
|
|
|
|
|
IEC 60335-2-14 Test probe B of IEC 61032 with circular stop face with a diameter of 125 mm Parameter: 1,Jointed Finger Length:100mm(30/30/40mm); 2,Dam-board Diameter:125mm; 3...
|
|
|
|
|
Test Probe D, IEC60529 Test Wire 1.0mm, IP4X Introduction: 1,According to: IEC61032:1997,IEC60529,IEC62368-1 2,Test Probe D is a necessary appliance for domestic and similar ...
|
|
|
|
|
IEC62368 Annex V.1.3 Test method 2 Unjointed test probe Openings tested with straight unjointed test probes Openings preventing access to a part by the applicable jointed test ...
|
|
|
|
|
Test Probe C, IEC60529 Test Rod 2.5mm, IP3X Introduction: 1,According to: IEC61032:1997,IEC60529,IEC62368-1 2,Test Probe C is a necessary appliance for domestic and similar ...
|
|
|
|
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could ...
|
|
|
|
|
Test finger nail , IEC 60335-1 Figure 7 Test Equipment Test finger nail Product information: The test finger nail complies with the IEC 60335-1figure 7 standard requirements. It is ...
|
|
|
|
|
IEC60335-2-24 Clause 21.102 White Lamp Test Probe for Protection Test on the Lamps Product information: This test probe conforms to IEC60335-2-24 Clause 21.102. It is used for ...
|
|
|
|
|
UL507-Figure 8.2 Probe For Fan Impellers And Other Moving Parts Of Stationary Fans UL507-figure 8.2 Probe for fan impellers and other moving parts of stationary fans and fans ...
|
|
|
|
|
Wedge probe , IEC 62368-1 Figure V.4 – Wedge probe According to standard: IEC62368-1 Material :heat-treated steel Length :300mm Width :50mm Bendable Section :30/30/40mm Calibration ...
|
|
|
|
|
Test Probe B , IEC61032-Figure 2 , IEC test equipment IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long IEC61032 Equipment list No. Items ...
|
|
|
|
|
UL507-figure 8.1 Probe for impellers of portable appliances ,Hazardous Moving Parts Probe Parameter: 1,Total Length:88.9mm(3.5inch) 2,Head Length:25.4mm(1inch) 3,Head Radius:R3...
|
|
|
|
|
Flat Probe as per EN 60598-2-20 clause 20.12.3 This flat probe, 0.5 mm thick and 8 mm wide, with a rounded tip having a radius of 4 mm. It shall not be possible to touch live parts ...
|
|
|
|
|
UL Enamel Wire Probe 10 This probe is use to checking access to enamel coated wire accord to UL standard requirement. stainless steel with derlin handle.
|
|
|
|
|
UL1005 Electric Flatirons -Figure 7.1 Probe 7.7 An opening in the enclosure of a flatiron located within 1 in (25.4mm) of the soleplate surface is acceptable if the probe ...
|
|
|
You may also be interested in :
