Light Duty 150T Euro Double Girder Eot Crane With Electric Hoist

Light Duty 150T Euro Double Girder Eot Crane With Electric Hoist

Description of Euro Double Girder Eot Crane

Double Girder Eot Crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is an excellent choice where high speeds and heavy service are required.It is capable of such works as transfer, assembly, check and repair as well as load and unload at mechanic procesing workshop, subsidiary workshop of metallurgical mills, warehouse, goods yard and power station.

Technical parameter of Euro Double Girder Eot Crane

Features of Euro Double Girder Eot Crane

Appearance paint

To prevent corrosion during manufacturing process, pretreatment on the plate - sandblasting rust (rust grade Sa2.5 level, the degree of roughness EZ40-80 micron) and spraying epoxy zinc-rich primer pre-production, effective prevent corrosion during manufacturing process. After welding inspection, the whole crane will be painted with two primer coat, one middle paint, two finishing coat, the total thickness of the paint film to reach 75 ~ 140μm.

Safety protection system

Main and auxiliary lifting mechanism of the crane are both equipped with overload limiter. When the load reaches 90% of rated load, issued of suggestive alarm signal; when lifting weight reaches more than 105% of rated load, it will automatically and immediately cut off the lifting power source, and issued prohibitory alarm signal. Crane main equipped with analog tonnage display instrument.

According to crane mechanical safety rules, each exposed wounding dangerous rotating parts have to be set up with shields, and wire rope anti-pumping device. Shield in the form of detachable safety cover.

Platforms, walkways and ladders set up to facilitate the operator's maintenance and inspection. Ladders step, outdoor platform and walkway should be skip resistance, walkway, platform and ladder width not less than 500mm, walkway using tread plate.
Crane installed with lifting height limiter and traveling stroke limiter, through electric control to achieve security protection for traveling stroke and locations.

Install cushioning device on crane to buffer crane operation braking kinetic inertia. While installed stop devices on the limit position of each crane operating mechanism to prevent the risk when crane runs exceeds the limit position.

Install rail sweep on crane to clean up debris on the rail, to prevent dangerous such as derailment caused by debris on the track. Rail sweep board is 10mm away from the track surface.

Set electrical interlock protection system in the crane railing door, cut off the supply power of which mechanism movement is dangerous for personnel.

European Double Girder Overhead Crane electrical part installed with phase lack protection, wrong phase protection, low-voltage and overvoltage protection, short circuit protection, overcurrent protection, overload protection, ground fault protection and other electrical protection, sound and light alarm, to ensure crane operation under stable and safe conditions.