0.5T ~ 10T Industrial LX Type Single Beam Eot Crane For Workshop

0.5 T ~ 10 T Industrial LX Type Single Girder Eot Crane For Workshop

Single Girder Eot Crane Description

LX Electric Single Girder Suspension Crane is a light duty crane. LX electric single-girder suspension crane is mainly used in places where it is impossible to install column-supported bridge cranes. The end car of the underslung overhead traveling crane rides on the bottom flange of the runway beam. Typically, underslung runways are suspended from the roof of a building and are only suitable for light lifts, not exceeding 10 tonnes. The LX Electric Single Girder Suspension Crane is suitable for working environments with operating temperatures between -25C and +40C. It is forbidden to use in places where there are flammable, explosive and corrosive items in stock.

Single Girder Eot Crane Main features

1. One type of main girder is consisted of I-beam and channel, used for lifting small tonnage loads and the other type is consisted of U shaped steel and I- beam, used for large tonnage loads.
2. All the hoist and crane movements are independent and can be run simultaneously.
3. Electric hoist mobile power supply is constituted by flat cables or special cables.
4. The electric hoist can be selected according to your requirements.
5. Ground control method: pendant and remote control.

Single Girder Eot Crane Technical parameter

Single Girder Eot Crane Advantages 

1. High safety and reliability
2. Tight structure and good rigidity
3. Flexible operation and low maintenance
4. Low noise and no pollution
5. Wide selection and application
6. Smoothing moving, effectively braking and long service life.
7. High quality and cost-effective crane price.

Single Girder Eot Crane Application

Single girder suspension crane is usually used in the working environment, there is no inflammable, explosive or corrosive substances or media, such as mechanical assembly, warehouses, caves, etc.

Single Girder Eot Crane Image