Truss Double Girder Gantry Crane Industrial A Frame Rubber Tired Electric Motors Driving

Double Beam Truss Gantry Crane , Industrial A Frame Gantry Crane Rubber Tired

Description

The truss gantry crane is designed and manufactured according to the standard JB / T5663-2008 of the Ministry of Machinery Industry of China. CD1, MD1 electric hoists and trolley can be fitted on this crane. The cantilever parts can be designed according to the factory operating space.

The truss gantry crane has latticed structure with a small windward area, light weight, good lifting ability and so on. It is an ideal lifting equipment employed in the warehouse, freight yard, terminals and other places.

There are two ways of the crane traveling: separated drive and drive brake. This product can be controlled on ground and operating room. The operating room can be open or closed, which can be installed on the left side or right side and there are 3 ways to enter the room, side, end face and top to meet the needs of users in a variety circumstances.

Safety gantry crane :

1). Overload protection;

2). Main lifting motor with thermal protection;

3). Hooks with latch;

4). Rubber buffers;

5). Protective earthing;

6). Crane switch and travel end switch;

7). Emergency switch can stop all movement when dangerous happened;

8). Sub-assemblies characteristic are tested before assembly;

9). All cranes must be preassembled and tested before leaving factory and offer the certification of test;