|
[China]
Trade Verify
Address: Shenzhen, China
Contact name:Fiona Liang
Tianjin Estel Electronic Science and Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Sunproof IP55 Remote Power Enclosure With Air Conditioner Cooling With Monitoring Unit
1. Enclosure Specifications
| External Size | W*D*H 650*650*1200mm |
| Environment Monitoring Unit | 1U, DC48V |
| Cabinet Layout | 1 compartment |
| Cabinet Inlets | From cabinet bottom |
| Illumination | DC48V LED lamp |
| Grounding Protection | Copper bar |
| Color | Grey (support custom made) |
| Cooling System | AC220V Air Conditioner |
| Coating | Anti-corrosion outdoor powder coating |
| Alarm sensors | Door sensor, water sensor, smoke sensor,temperature and humidity sensor |
| Cabinet Lock | Anti-theft three point lock(support padlock) |
Color | Grey(support custom made) |
| Protection Level | IP55 |
| Coating | Anti-corrosion outdoor powder coating |
| Certificates | CE |
3. Enclosure details
3.1 Waterproof, moistureproof, dustproof, and corrosion resistance.
3.2Floor mounting,Wall mounting,Pole mounting optional.
3.3 Good quality double galvanzied steel,or sandwich panel.
3.4 19” standard installation rack.
3.5 The cabinets system can support Electrical equipments,PDU,Mornitoring system and etc.
3.6 Switching mode power supplies are available upon request.
3.7 Cabinets cooling uses air conditioner.
3.8 Including -48VDC illumination lamp.
3.9 There are entrance holes individually for power cable, signal cable and optical cable.
3.10 All the cables, sealing and heat insulation used in the cabinet are made from flame retardant materials.
3.11 CE certificates.
3.12 IP55 protection level.
4. Enclosure Theft Proof Design
4.1 Three point lock lock theft proof design
Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.
4.2 Connection and Fastening
Use anti-loose threaded connection as structure and bearer connection. Door hinges use inner hinge mode.
5. Environment Monitoring Unit
6. Quality Control Introduction
Our company resolutely implements the principle of quality first, we control and supervise the whole production process in strict accordance with the requirements of the ISO9001 system and the related implementation process. The quality department strictly controls all aspects like material inspection, production processes, product testing, shipment inspection and establishes traceable documents and product identification. Our quality inspection team, is very familiar with the various standards, strict implementation of the standards required sampling and testing methods.
7. Leading Time
Usually about 10-15 days. The exact lead time need to be confirmed according to the quantity of order.
8. Factory Introduction
Factory Size: 3000 Square Meters
No. of Main Production Lines: 5
Contract Manufacturing: OEM Service Offered, Design Service Offered, Buyer Label Offered
Production Experience: 13 Years
