|
[China]
Trade Verify
Address: Shenzhen, China
Contact name:Fiona Liang
Tianjin Estel Electronic Science and Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
14U Customized Cabinet Air Conditioner Cooling For Outdoor Telecom Station Use
1.Technical Parameter
| Configuration | Item | Technical Parameter |
| Cabinet | Model | ET6575930-14U |
| Protection Level | IP55 | |
| External Dimension | H930mm×W650mm×D750mm (including air conditioner ) | |
| 19inch ,14U | ||
| Material | Galvanized steel, 1.2mm thickness, single wall.Thickness of bearing parts: 2.0mm | |
| insulation | PEF | |
| Coating | Galvanized steel, 1.2mm thickness, single wall. Thickness of bearing parts: 2.0mm | |
| Color | RAL7035 | |
| door | Front open door | |
| lock | Anti-theft four-point locking system | |
| Hinge | Inner hinge | |
| Installation Options | Installation Options with wheels | |
| Cable Routing | Cable in and out from the bottom of cabinet | |
| Cooling | Air conditioner | DC 500W 550V 50HZ |
| Power distribution | Anti-thunder | 60KA |
| DC input | 63A/2P×1 | |
| DC output | 32A/1P×2,16A/1P×4 | |
| Others | 48VDC LED lamp with switch | |
| Environment | Working Temperature | -40℃~+55℃ (+Solar Radiation) |
| Storage Temperature | -40℃~+70℃ | |
| Working Humidity | 5%~95%(No condensation) | |
| Working Altitude | 0~4000 meters | |
2.Configuration Table
| No. | Item | Quantity | Unit | Specs |
| 1 | Outdoor Telecom Cabinet | 1 | Set | (1)External Dimension: H×W×D 930×650×750mm (2)One compartment: including 19” rack (3)With one front door , and anti-theft three point lock for outdoor cabinet (support padlock) (4) Material: Galvanized steel, single wall with insulation |
| 2 | Air Conditioner | 1 | Set | Cooling Capacity: 500W; Power Supply: AC220V |
| 3 | Power Distribution | 1 | PC | Anti-thunder 60KA DC input 63A/2P×1 DC output 32A/1P×2,16A/1P×4 |
| 4 | LED Lamp Sensor | 1 | PC | Used for controlling LED lamp on/off |
| 5 | LED Lamp | 1 | PC | AC220v,used for illumination in the cabinet |
| 6 | Package | 1 | Set | Wooden Case |
3. Cable Inlet
Cables are routed at the bottom of the cabinet. The cable inlet holes are customized according to customer requirements
4. Grounding Protection
The cabinet includes grounding copper bar with anti-corrosion coating. There are enough screws for wiring connection terminals.
The metal part of the cabinet should be interconnected and be connected with grounding bar. Connection resistance between any two points is lower than 0.1Ω.
Protective earthing of other equipments inside the cabinet should be connected to the grounding bar.
5. Pictures
There are one monitor and one PDU and one DDF installed on the 19 inch rack inside of the cabinet.
6. Delivery Time
Generally it will take about 20 days to produce the cabinet.
