Shenzhen iseelink Communication Technology Co., Ltd. |
Verified Suppliers
|
|
MEMS OSW1×8 OADM OXC optical switch
Introduction of OSW 1*8 optical fiber switch
Optical Switch is an optical switch based on MEMS (Micro Electro Mechanical System) technology that allows channel selection between a single input light and N input lights. It has the characteristics of small size, long duration and stable reliability. It is widely used in OADM, OXC, OPM and other optical network fields.
Specifications
Parameters | Unit | MEMS OSW1×8 | ||
Wavelength Range | nm | MM 850±20 | MM 1400~1700nm | SM 1310±20/1550±20/1625±20 |
Test Wavelength | nm | MM 850 | MM 1550 | SM 1310/1550 |
Insertion Loss 1, 2 | dB | 0.8(TYP) 1.0(MAX) | 0.8(TYP) 1.0(MAX) | |
Return Loss 1, 2 | dB | MM ≥ 25 | SM ≥ 40 | |
Crosstalk 1 | dB | MM ≥ 30 | SM ≥ 45 | |
PDL | dB | ≤0.15 | ||
WDL | dB | ≤0.3 | ||
Repeatability | dB | ≤0.1 | ||
Durability | Cycles | ≥109 | ||
Switching Time | ms | ≤20 | ||
Switch Mode | Non-latching | |||
Optical Power | mW | ≤500 | ||
Power Supply | V | 5±0.2 | ||
Operating Temperature | ℃ | -5 ~ +70 | ||
Storage Temperature | ℃ | -40 ~ +85 | ||
Relative Humidity | % | 5 ~ 95 | ||
Dimension | mm | TYPE B: (L)65×(W)24.7×(H)11 ±0.2 | ||
Note: 1 Within operating temperature and SOP. 2 Excluding connectors. |
Optical Route
Pin Assignment
TTL/UART
Pin | Name | Description | I/O | specification | Unit |
1 | NC | Not Connected | |||
2 | VCC | Power Supply | IN | 5±0.2 | VDC |
3 | /STROBE | Strobe signal, Falling Edge Active | IN | LVTTL | |
4 | GND | Ground | IN | ||
5 | D0 | Data0 Input | IN | LVTTL | |
6 | D1 | Data1 Input | IN | LVTTL | |
7 | D2 | Data2 Input | IN | LVTTL | |
8 | NC | Not Connected | |||
9 | TXD | UART transmit | OUT | LVTTL | |
10 | RXD | UART receive | IN | LVTTL | |
11 | GND | Ground | IN | ||
12 | NC | Not Connected | |||
13 | D3 | Data3 Input | IN | LVTTL | |
14 | /RESET | Hardware Reset, Logic Low Active | IN | LVTTL |
Ordering Information: 7203-1×8M-A-B-C-D-E-F-G-H
Example:7203-1×8M-T/U-SM-FS-5-90-10-02-FA
A | B | C | D | E | F | G | H |
Control type | Fiber Type | Test Wavelength | Operating Voltage | Tube Type | Fiber Length | Dimension | Connector |
T: TTL U: Uart T/U: TTL/Uart I: I2C X: Others | SM: SM,9/125 M5: MM,50/125 M6: MM,62.5/125 X: Others | 85: 850±40nm O: O band(1260~1360nm) C: C band(1530~1565nm) L: L band(1565~1625nm) U: U band(1625~1675nm) FS: 1260~1650nm FS2: 1400~1700nm X: Others | 5: 5V | 25: 250um 90: 900um 20: 2mm 30: 3mm X: Others | 05: 0.5m±5m 10: 1.0m±5m 12: 1.0m±5m 15: 1.5m±5m X: Others | 02: (L)65×(W)24.7×(H)11±0.2mm X: Others
| OO: None LP: LC/PC LU: LC/UPC LA: LC/APC FP: FC/PC FU: FC/UPC FA: FC/APC SP: SC/PC SU: SC/UPC SA: SC/APC STP: ST/PC STA: ST/APC X: Others |
Packing List
· 1pc optical fiber bypass switch
· 1pc user manual
· 1pc warranty card
Advantage of our company :
1. National High-tech enterprise certification;
2. Fiber Optical Innovative &production team Over 10 years;
3. Fiber optical active and passive components production Workshop;
4. Strict quality management system;
5. Professional One stop supply & service;
6. OEM&ODM available;
7. Reliable and Timely customer services;