|
[China]
Trade Verify
Address: 4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China
Contact name:Evelyn
Shenzhen iseelink Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
1×1 Optical Fiber Switch-Neutral with Low Loss & High Reliability
Introduction
Our company, Shenzhen Overlink Technology Co., Ltd., is proud to present our highly sought-after Optical Switch. Renowned for its exceptional performance, minimal insertion loss, and compact design, our Optical Switch is the perfect component for OADM, OXC, system monitoring, and protection. Its compact package makes it effortless to integrate into high-density optical communication systems, making it an ideal choice for a wide range of applications.
Pin Configurations
| Type | State | Optical Route | Electric Drive | Status Sensor | ||||||
| 1×1 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 | ||
| Latching | A | Light close | -- | -- | GND | V+ | Close | Open | Open | Close |
| B | P1-P2 | V+ | GND | -- | -- | Open | Close | Close | Open | |
| Non-latching | A | Light close | -- | -- | -- | -- | Close | Open | Open | Close |
| B | P1-P2 | V+ | -- | -- | GND | Open | Close | Close | Open | |
Ordering Information: 7201-1×1-A-B-C-D-E-F-G
Example:7201-1×1-SM-FS-3-L-90-12-FA
| A | B | C | D | E | F | G |
| Fiber Type | Test Wavelength | Operating Voltage | Switch Type | Tube Type | Fiber Length
| Connector |
SM: SM, 9/125 M5:MM, 50/125 M6:MM, 62.5/125 X: Others | 85: 850±40nm O: O band(1260~1360nm) C: C band(1530~1565nm) L: L band(1565~1625nm) U: U band(1625~1675nm) FS: 1260~1650nm | 3: 3V 5: 5V
| L: Latching N: Non-latching | 25:250um(Bare fiber) 90:900um X: Others | 05: 0.5m±5m 10: 1.0m±5m 12: 1.2m±5m 15: 1.5m±5m X: Others | OO: None LP: LC/PC LU: LC/UPC LA: LC/APC FP: FC/PC FU: FC/UPC FA: FC/APC SP: SC/PC SU: SC/UPC SA: SC/APC STP: ST/PC STA: ST/APC X: Others |
FAQ:
Q1. Would it be possible to know the lead time for our orders, please?
A: Our team requires 3-5 days to prepare samples, while mass production usually takes 8-10 working days.
Q2. May I request to have my company logo printed on the LED light products?
A: Certainly, we would be happy to do so. Kindly inform us beforehand to arrange for the appropriate production requirements.
Q3. In case of any faults with the product, what is your process for resolution?
A: At the very outset, please be assured that our products are manufactured under strict quality control systems, resulting in a minimal defective rate of below 0.2%. Nevertheless, in the unlikely event of any faults, our team would promptly investigate and resolve the issue to our customer's satisfaction.
