2 port 10/1000Mbps unmanaged Industrial POE Fiber Media Converter
Introduction of 2 port outdoor poe switch
IM-PC111GE series is the 10/100/1000 Mbps industrial POE fiber
media converter, comply with IEEE802.3af/at, power on POE IP
cameras through the Ethernet cable, simple construction, power
range up to 100 meters, operating temperature-40 ℃ to + 75 ℃, meet
IP40 protection degree and EMC industrial grade requirements, DIN
rail installation, pass through dangerous environmental
certification and comply with FCC and CE standards. The reliable
industrial grade design could ensure continuous and stable
operation of the automation system.
Product Features of unmanaged POE switch
- Low power consumption, fan-less design, metal shell.
- Self-developed power supply, high redundancy design, providing a
long term and stable PoE power output.
- CE, FCC, RoHS.
- The user-friendly panel, it can show the device status through the
LED indicator of PWR,SYS, Link, PoE.
Specifications of 10/100/1000Mbps POE Switch
Product Name | 10/100/1000Mbps Industrial POE Fiber Media Converter (1F+1TP) | Model No. | IM-PC111GE | Port | 1 x 1000Mpbs SFP port SM:1310nm/1550nm,20Km 1490nm/1550nm,40~120Km MM:1310nm,2Km 1x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) | Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) | Network media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤10meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) | LEDs | Power, network, fiber | Flow Control | Back pressure for half duplex, IEEE 802.3x pause frame for full
duplex | Environment | Working temperature:-40°~ 75°C Storage temperature:-40°~ 85°C Working humidity:10%~90%,non-condensing Storage humidity:10%~95%,non-condensing | Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4 | Safety | CE Mark ,commercial CE/LVD EN60950 | Shell | Corrugated metal shell | Packaging Details | Each product is packed in a high quality PE bag, Then put into a
box or carton. |
|
Application
![](http://img.everychina.com/nimg/73/ef/45ef3d3bb1e80a3d3384486adec9.jpg)
Dimension
![](http://img.everychina.com/nimg/ec/b0/6cec6932f589080275db95830350.jpg)
![](file:///C:/Users/ADMINI~1/AppData/Local/Temp/ksohtml12192/wps2.jpg)
Production steps
- Welding: Weld the necessary components
- Cleaning: To avoid any possible dysfunction due to dust or scraps
on the PCB boards.
- Assembling: Builds up components of a product, like panels, screws,
PCB boards.
- Testing: To make sure the product is basically working fine after
assembling
- Aging: To check if the product can work smoothly for long time
without any minors such as LED indicators, voltage. This will
usually last for 24 to 48 hours.
- Testing: To test if the product can process data or video signals
correctly. Any data loss? Transmission rate correct? Any data
packet failure? Such questions would be verified in this procedure.
- QC testing: This is the third and also last check of product
quality. If it goes good, our packing staff will pack it up
according to customer requirements and attach to the packing box a
product label.
- When all above is done, the product will go to market.
Why choose us?
1. All products are under strict quality control and well tested
for 3 times before shipment;
2. According to the survey, the repair rate of our products is 3% ~
5%, which is the lowest in the peer.
3. Any problem, pls feel free to contact us.
4. The warrany of the commercial products is 1 years while the
industrial products is 3 years.