SUZHOU CMT ENGINEERING CO., LTD. |
Verified Suppliers
|
|
1.Project introduction
This line can produce tinplate products used in packaging, canning,
and aerosol canning, can caps and bottle caps. Tinplate is
tin-coated cold-rolled low-carbon steel sheets or coils, which has
steel' s strength and formability, as well as anti-corrosion,
easy-welding and shining appearance from tin.
•Custom made, thickness can be from 0. 14mm to 0. 6mm, the width can
be as wide as 1200mm
•Can be adapted to different raw material, including MR, SPCC, 08Al,
Q195LD. The temper can be from T1, T2, T3, T3. 5, T4, T5 and DR7,
DR7. 5, DR8 and DR9.
•The whole line is using AC frequency inverter driving, the maximum
speed can be 420mpm
•Use soluble anode (or insoluble anode)
•Combined-melting technical , Pure induction heating.
•Tin coating mass: 2. 8 to 11.2 g/m2 , symmetrical or asymmetrical
coating
2.Main technical specification
Material and final products:
(1)Incoming material: annealed cold roll coil
(2)Temper: T2 to T5, DR, DI
(3)Thickness:0.15 to 0.55mm
(4)Width: 750 to 1050mm
(5)Tin coating mass: 2.8 to 11.2 g/m2, symmetrical or asymmetrical
3. Technological process
This unit is divided into seven parts as follows:
(1) Entrance section
(2) Entrance looper section
(3) Pretreatment section (degreasing and pickling)
(4) Tin plating section
(5) Post-processing section
(6) Export looper section
(7) Exit section
4.Pictures
For more information, pls contact me at any time.