DC5V 5.1 Optical Fiber Converter , 3.5mm Digital To Analog Audio Converter

Factory Price Digital To Analog Audio Converter Digital Optical Coaxial To 5.1 Channel Adjustable 3.5mm Converter

This digital to analog audio converter is suitable for home or professional audio switching. He converts coaxial or To s link digital audio signals into analog L/R audio and can be connected to external equipment, such as jack via standard RCA_type amplifier. You can also output from the 3.5mm headphone jack to connect high-fidelity headphones. The converter is small and easy to install. Built-in high-fidelity amplifier chip, he a d p-can easily put 16-300 ohm high-fidelity headphones with a sharpening stone and RCA output port. The product supports shutdown, small size adjustment, easier to adapt to different sources and different environments. The product also supports To s linkTo s link input, coaxial output, coaxial input To s link, coaxial output, which can adapt to more digital audio.

Product specifications

Input terminal: 1 × coaxial digital (coaxial) terminal, 1 × optical digital (SPDIF / Toslink) audio terminal
Analog output: 1×RCA (L/R) terminal, 1×3.5 mm earphone terminal
Digital output: 1 x coaxial digital (coaxial) terminal, 1 x optical digital (SPDIF / Toslink) audio terminal
Sampling rate: at 32kHz, 44.1KHz, 48KHz, 96KHz, 192KHz, 24 bits
Input power: DC5V 500MA

Product Features
●Coaxial or To s link digital audio signal is converted to analog L/R audio
●Support sampling rate at 32KHZ, 44.1Khz, 48khz, 96khz and 192khz, 24-bit resolution
●The incoming bit stream of 24-bit S/PDIF is in the left and right channels
●Support 16-300 ohm high-fidelity headset
●Support shutdown
●Support the size of the sound to be adjusted
●Support coaxial to fiber output
●Support fiber to coaxial output
●Provide electrcomagnetic-noise-free transmission

Please pay attention to connection and operation:

Before installing, make sure all the solutions you want to connect to are closed,

1. Use the appropriate Toslink or coaxial cable to connect the audio source device to the converter,

2. Use the appropriate R/L cable to connect the A/V receiver or amplifier to the converter.

3. Insert the DC side of the USB5V power cord into the converter, then connect the AC side of the power supply to the USB socket, and turn the power switch to adjust the volume.

Note: Gently insert/unplug the cable.