Home Companies LonRise Equipment Co. Ltd.

C9115AXE - H - Cisco Catalyst 9100 Access Point

LonRise Equipment Co. Ltd.

Contact Us

[China] country

Trade Verify

Address: 26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China

Contact name:Laura

Inquir Now

LonRise Equipment Co. Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

C9115AXE - H - Cisco Catalyst 9100 Access Point

Country/Region china
City & Province shanghai shanghai
Categories Silver & Sterling Silver Jewelry
InquireNow

Product Details

C9115AXE - H - Cisco Catalyst 9100 Access Point in stock

Cisco® Catalyst® 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9115AXE-H is the Cisco Catalyst 9115AX Series Access Point, Internal antenna; Wi-Fi 6; 4x4:4 MIMO, H Domain.

 

C9115AXE-H Specification

DescriptionCisco Embedded Wireless Controller on Catalyst Access Point,H Domain
Software

•Cisco Unified Wireless Network Software Release 8.9 or later

•Cisco IOS ® XE Software Release 16.11or later

Supported wireless LAN controllers

•Cisco Catalyst 9800 Series Wireless Controllers

•Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

• 4x4 MIMO with four spatial streams

Maximal Ratio Combining (MRC)

802.11n and 802.11a/g beamforming

20- and 40-MHz channels

PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 Dynamic Frequency Selection (DFS)

Cyclic Shift Diversity (CSD) support

802.11ac

•4x4 downlink MU-MIMO with four spatial streams

MRC

802.11ac beamforming

20-, 40-, 80-, and 160-MHz channels

PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 DFS

•CSD support

802.11ax

•4x4 downlink MU-MIMO with four spatial streams

Uplink/downlink OFDMA

TWT

BSS coloring

MRC

802.11ax beamforming

20-, 40-, 80-, and 160-MHz channels

PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

802.11 DFS

CSD support

Integrated antenna

•2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth

•5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth

External antenna (sold separately)

•Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

•Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

Interfaces

•1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) IEEE 802.3bz

•Management console port (RJ-45)

•USB 2.0 (enabled via future software)

Indicators•Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)• Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)
Input power requirements

•802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)

Cisco power injector, AIR-PWRINJ6=

802.3af PoE

Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off.

Environmental

Cisco Catalyst 9115AXI

•Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

•Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

•Operating temperature: 32° to 122°F (0° to 50°C)

•Operating humidity: 10% to 90% (noncondensing)

•Operating altitude test: 40˚C, 9843 ft.

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled.

Cisco Catalyst 9115AXE

•Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

•Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

•Operating temperature: -4° to 122°F (-20° to 50°C)

•Operating humidity: 10% to 90% (noncondensing)

•Operating altitude test: 40˚C, 9843 ft.

System memory

•2048 MB DRAM

•1024 MB flash

Available transmit power settings

2.4 GHz

•23 dBm (200 mW)

•20 dBm (100 mW)

•17 dBm (50 mW)

•14 dBm (25 mW)

•11 dBm (12.5 mW)

•8 dBm (6.25 mW)

•5 dBm (3.13 mW)

•2 dBm (1.56 mW)

• -1 dBm (0.79 mW)

• -4 dBm (0.39 mW)

5 GHz

•26 dBm (400 mW)

•23 dBm (200 mW)

•20 dBm (100 mW)

•17 dBm (50 mW)

•14 dBm (25 mW)

•11 dBm (12.5 mW)

•8 dBm (6.25 mW)

•5 dBm (3.13 mW)

•2 dBm (1.56 mW)

•-1 dBm (0.79 mW)

-4 dBm (0.39 mW)

Frequency band and 20-MHz operating channels

H (H regulatory domain):

•2.412 to 2.472 GHz; 13 channels

•5.180 to 5.320 GHz; 8 channels

•5.745 to 5.825 GHz; 5 channels

 

Huawei S5735-L24P4S-A Switches 24 x 10/100/1000Base-T ports, 4 x GE SFP ports, PoE+ 0

Huawei S5735-L24P4S-A Switches 24 x 10/100/1000Base-T ports, 4 x GE SFP ports, PoE+ 1

Hot Products

C1111 - 4P - Cisco 1100 Series Integrated Services Routers in stock Cisco 1100 Series Integrated ...
C1111 - 8PLTELA - Cisco 1100 Series Integrated Services Routers C1111-8PLTELA Specification ...
Cisco ISR4321 - AX / K9 ( 2GE 2NIM 4G FLASH 4G DRAM IP Base Security AppX ) ISR4321-AX/K9 intelligen...
Cisco 4000 Router ISR4331 / K9 ( 3GE 2NIM 1SM 4G FLASH 4G DRAM IP Base ) Cisco 4331 Integrated ...
C9115AXE - H - Cisco Catalyst 9100 Access Point in stock Cisco® Catalyst® 9115 Series Wi-Fi 6 Access ...
C9120AXE - H - Cisco Catalyst 9120 WiFi 6 Access Point best price The Cisco® Catalyst® 9120 Series ...