|
[China]
Trade Verify
Address: 26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China
Contact name:Laura
LonRise Equipment Co. Ltd. |
|
Verified Suppliers
|
|
|
CE6810-24S2Q-LI-F Huawei Network Switch 24-Port 10G SFP+,2-Port 40GE QSFP+,2*FAN Box
CE6810-24S2Q-LI-F is one of the Huawei CE6810-24S2Q-LI Series Switches. Huawei CE6810-24S2Q-LI Series Switches provide high-throughput, low-latency performance for data centers and high-end campus networks. 2 40 GE uplink ports enable exceptional performance when bridging with core switches using a Transparent Interconnection of Lots of Links (TRILL) network. Combine CE6800 and CE12800 switches to implement a non-blocking network platform.
Huawei CloudEngine 6800 (CE6800) series switches are next-generation 10G Ethernet switches designed for data centers and high-end campus networks. Using the Huawei VRP8 software platform, CE6800 switches provide extensive data center service features and high stacking capability.
In addition, the airflow direction (front-to-back or back-to-front) can be changed. CE6800 switches can work with CE12800 switches to build an elastic, virtualized, high-quality fabric that meets the requirements of cloud-computing data centers.o help enterprises and carriers build a scalable data center network platform in the cloud computing era.
CE6810-24S2Q-LI-F Specification | |
| 10G Base-T Ports | 0 |
| SFP+ Ports | 24 |
| QSFP+ Ports | 2 |
| Switching Capacity | 640 Gbit/s |
| Forwarding Rate | 480 Mpps |
| Airflow Design | Front-to-back or back-to-front |
| Device Virtualization | iStack |
| Super Virtual Fabric (SVF) | |
| Network Virtualization | M-LAG |
| VM Awareness | Agile Controller |
| Network Convergence | FCoE |
| DCBX, PFC, and ETS | |
| Programmability | OpenFlow |
| OPS | |
| Linux container for open source and customization programming | |
| Traffic Analysis | NetStream |
| sFlow | |
| VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
| Default VLAN | |
| QinQ | |
| MUX VLAN | |
| GVRP | |
| ACL | Ingress: 1,250 Egress: 500 |
| MAC Address Table | Maximum: 128k |
| Dynamic learning and aging of MAC addresses | |
| Static, dynamic, and blackhole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| MAC address limiting based on ports and VLANs | |
| ARP (maximum) | 1.5k |
| IPv4 FIB (maximum) | 1.5k |
| IP Routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
| IPv6 FIB (maximum) | / |
| Multicast FIB (maximum) | / |
| Multicast | IGMP snooping |
| Reliability | LACP |
| STP, RSTP, VBST, MSTP | |
| BPDU protection, root protection, and loop protection | |
| Smart Link and multi-instance | |
| DLDP | |
| ERPS (G.8032) | |
| VRRP, VRRP load balancing, and BFD for VRRP | |
| QoS | Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
| Actions of ACL, CAR, re-marking, and scheduling | |
| Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR | |
| Congestion avoidance mechanisms, including WRED and tail drop | |
| Traffic shaping | |
| Configuration and Maintenance | Console, Telnet, and SSH terminals |
| Network management protocols, such as SNMPv1/v2c/v3 | |
| File upload and download through FTP and TFTP | |
| BootROM upgrade and remote upgrade | |
| 802.3az Energy Efficient Ethernet (EEE) | |
| Hot patches | |
| User operation logs | |
| ZTP | |
| Security and Management | 802.1x authentication |
| Command line authority control based on user levels, preventing unauthorized users from using commands | |
| DoS, ARP, and ICMP attack defenses | |
| Port isolation, port security, and sticky MAC | |
| Binding of the IP address, MAC address, interface number, and VLAN ID | |
| Authentication methods, including AAA, RADIUS, and HWTACACS | |
| Remote Network Monitoring (RMON) | |
| Dimensions (W x D x H) | 442 mm x 600 mm x 43.6 mm |
| Weight (fully loaded) | 10.1 kg (22.3 lb) |
| Environmental Parameters | Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) Storage temperature: -40°C to 70°C (-40°F to 158°F) Relative humidity: 5% RH to 95% RH, non-condensing |
| Operating Voltage | AC: 90V to 290V DC: -38.4V to -72V |
| Max. Power Consumption | 171W |
hows the comparison of CE6810-24S2Q-LI-F, CE6810-32T16S4Q-LI-B and CE6810-48S4Q-EI.
| Product Code | CE6810-24S2Q-LI-B | CE6810-32T16S4Q-LI-B | CE6810-48S4Q-EI |
| Software Version | V100R005C10 and later | V100R005C10 and later | V100R003C00 and later |
| Fixed 10GE interfaces | 24*10GE SFP+ | 32*10GBASE-T 16*10GE SFP+ | 48*10GE SFP+ |
| Fixed 40GE interfaces | 2*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces. | 4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces | 4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces. |
| Fixed 100GE interfaces | None | None | None |
| Switching Capacity | 640 Gbit/s | 1.28 Tbit/s | 1.28 Tbit/s |
| Forwarding Rate | 480 Mpps | 960 Mpps | 960 Mpps |
| Maximum power consumption | 171W | 288W | 238W |
