Home Companies LonRise Equipment Co. Ltd.

Dual Core Cisco SPA Card WS-X45-SUP7-E Supervisor Engine Catalyst 4500-E Series SUP7-E 848Gbps

LonRise Equipment Co. Ltd.

Contact Us

[China] country

Trade Verify

Address: 26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China

Contact name:Laura

Inquir Now

LonRise Equipment Co. Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Dual Core Cisco SPA Card WS-X45-SUP7-E Supervisor Engine Catalyst 4500-E Series SUP7-E 848Gbps

Country/Region china
City & Province shanghai shanghai
Categories Switching Power Supply
InquireNow

Product Details

Cisco WS-X45-SUP7-E Supervisor Engine Catalyst 4500-E Series

Overview 

WS-X45-SUP7-E, the Cisco Catalyst 4500E supervisor engine 7-E, is the leading borderless networks access and aggregation supervisor engine for the Cisco Catalyst 4500E series. Supervisor Engine7-E delivers high-performance aggregation deployments with increasing Gigabit Ethernet and 10G Ethernet fiber density along with hardware capabilities to support enterprise-level aggregation functions.

Notice that WS-X45-SUP7-E= is similar with WS-X45-SUP7-E, except that WS-X45-SUP7-E= is a spare one.

 

WS-X45-SUP7-E Appearance

 

Specifications:

WS-X45-SUP7-E Specification

Chassis compatibilityAll Catalyst 4500 E-series switches
Software requirements (minimum)Refer to your software release notes for the latest software release requirements
Chassis slot restrictions

•Catalyst 4503-E: Slot 1 only

•Catalyst 4506-E: Slot 1 only

•Catalyst 4507R-E and Catalyst 4507R+E: Slot 3 and slot 4

•Catalyst 4510R-E and Catalyst 4510R+E: Slot 5 and slot 6

Bandwidth per slot48-Gbps
Memory2-GB (upgrade to 4-GB)
STATUS LEDThe status LED indicates the current health of the supervisor engine and the current software state.
RESET switch

The RESET switch is used to reset and restart the switch.

Note Use a paper clip or other small, pointed object to press the RESET switch.

ACTIVE SUP LEDThe active supervisor engine LED indicates whether the supervisor engine is active or in standby mode in redundant supervisor engine configurations.
UTILIZATION LEDsEight LEDs indicate (as an approximate percentage) the current traffic load over the backplane.
USB connectorsTwo USB 2.0 ports are provided. Port 1 operates in device mode (upstream) and port 2 in host mode (downstream). Port 1 has a standard Type B USB connector and can be used as a USB console.Port 2 has a USB type A connector and a standard USB 2.0 device like a flash memory device can plug into this connector.
SECURE DIGITAL slotA standard Secure Data (SD) memory card interface is provided on the front panel
CONSOLE port

This is a 10/100/1000 port that uses an RJ-45 connector. The console port allows you th access the switch either locally (with a console terminal) has an RJ-45 connector. The console port allows you to perform the following functions:

•Configure the switch from the CLI

•Monitor network statistics and errors

•Configure SNMP agent parameters

10/100/1000 MGT port

The Ethernet management port is a Layer 3 host port to which you can connect a PC. You can use the Ethernet management port instead of the switch console port for network management. When managing a switch, connect the PC to the Ethernet management port on a Catalyst 4500 E-series switch.

Note When connecting a PC to the Ethernet management port, you must assign an IP address.

LINK LEDThe 10/100/1000 MGT port has a link LED associated with it.
1G/10G UPLINKS (SFP/SFP+) portsThe Supervisor Engine 7-E has four 1-G or 10-G ports that use either SFP transceivers or SFP+ transceivers.
Uplink port LEDsEach of the four uplink ports has two LEDs associated with it. One LED displays port status when a 1-GB SFP transceiver is installed in the port socket. The second LED displays uplink port status when a 10-GB SFP+ transceiver is installed in the port socket.
Power requirement302 W
Operating temperature

Certified for operation: 32° to 104°F (0° to 40°C)

•Designed and tested for operation: 32° to 130°F (0° to 55°C)

Humidity (RH) ambient (noncondensing)10 to 90%
Operating altitude

Certified for operation: 0 to 6500 ft (0 to 2000 m)

•Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)

Operating temperature

Certified for operation: 32° to 104°F (0° to 40°C)

•Designed and tested for operation: 32° to 130°F (0° to 55°C)

 

Other related products:

 

WS-X4448-GB-RJ45
WS-X4548-GB-RJ45
WS-X4548-GB-RJ45V
WS-X6148A-GB
WS-X6148A-GE-TX
WS-X6148A-GE-45AF
WS-X6148-GE-TX
WS-X6516A-GBIC
WS-X6548-GE-TX
WS-X6704-10GE
WS-X6704-10GE
WS-X6708-10GE-3CXL
WS-X6724-SFP
WS-X6748-GE-TX

 

If you have any questions about cisco poducts or want to know more the other cisco products, please do not hesitate to contact with Dannis Hu.


Skype: lonrisesales02
Email: dannis(at)lonriseeqt.com
Tel: 86 13601984814

Hot Products

Cisco WS-X4648-RJ45V+E Catalyst 4500 E-Series 48 port PoE+ Line Card Overview Cisco catalyst WS...
CISCO WS-X4748-RJ45-E 4500 E-Series Line Card Overview Cisco catalyst WS-X4748-RJ45-E line-card is ...
CISCO WS-X4748-RJ45-E 4500 E-Series Line Card Overview Cisco catalyst WS-X4748-RJ45V+E line-card is ...
CISCO WS-X4448-GB-SFP Catalyst 4500 48-Port 1000 Base-X GE Linecard Overview Catalyst 4500 PoE 802...
Cisco WS-X45-SUP7-E Supervisor Engine Catalyst 4500-E Series Overview WS-X45-SUP7-E, the Cisco ...
Cisco VS-S720-10G-3C 6500 Series Catalyst Virtual Switching Supervisor Engine Overview Cisco ...