Home Companies LonRise Equipment Co. Ltd.

Juniper Router Modules MPC4E-3D-32XGE-SFPP 32-port 10GbE SFP Modular Port Concentrator

Contact Us

[China]

Trade Verify

Address: 26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China

Contact name:Laura

LonRise Equipment Co. Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Juniper Router Modules MPC4E-3D-32XGE-SFPP 32-port 10GbE SFP Modular Port Concentrator

Country/Region	china
City & Province	shanghai shanghai
Categories	Routers

Product Details

Juniper Router Modules MPC4E-3D-32XGE-SFPP 32-port 10GbE SFP Modular Port Concentrator

MPC4E-3D-32XGE-SFPP Overview

Modular Port Concentrators (MPCs) are single-slot line cards for Juniper Networks® MX240,MX480, and MX960 3D Universal Edge Routers, as well as the MX20001 line of 3D UniversalEdge Routers. Powered by the programmable Trio chipset, MPCs support a wide range of Layer2, Layer 2.5, and Layer 3 services, integrated telemetry, and standards-based transport-classnetwork timing, as well as a wide variety of connectivity options to address the broadest rangeof service provider, cloud, and enterprise applications.

MPC4E-3D-32XGE-SFPP

Description	Fixed configuration MPC with thirty-two 10-Gigabit Ethernet ports Power requirement: 12.7 A @ 48 V (610 W) Weight: 19.4 lb (8.8 kg) Model number: MPC4E-3D-32XGE-SFPP
Hardware features	Line-rate throughput of up to 260 Gbps WAN-PHY mode at 10 Gbps on a per-port basis Supports maximum transmission unit (MTU) size of 9,192 bytes for host bound packets. For Junos OS 16.1R1 and later releases, the MTU size supported is 9,500 bytes. Supported on MX2020, MX2010, MX960, MX480, and MX240 routers with both normal-capacity and high-capacity power supplies and fan trays.
Software features	Optical diagnostics and related alarms Up to 260 Gbps of full-duplex traffic Intelligent oversubscription services Configurable LAN-PHY and WAN-PHY mode options per port Local loopback Configurable to interoperate with routers that use the 100-Gigabit Ethernet PIC (Type 4 PIC on Type 4 FPC) See Protocols and Applications Supported on the MPC4E for MX Series Routers for information about the protocols and applications that this MPC supports.
Cables and connectors	Tip: You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device. The list of supported transceivers for the MX Series is located at https://pathfinder.juniper.net/hct/category/#catKey=100001&modelType;=All&pf;=MX+Series. Note: SFPP-10GE-ZR has a commercial temperature rating and is not NEBS compliant when plugged into the 32x10GE MPC4E with SFP+. If the ambient air temperature exceeds 40°C, Junos OS disables the transmitter, which takes the optical transceiver offline. Note: SFPP-10G-DT-ZRC2 is not NEBS compliant when plugged into the MPC4E-3D-32XGE-SFPP MPC. If the ambient air temperature exceeds 40°C, Junos OS disables the transmitter, which takes the optical transceiver offline. Note: On the MX960 router, FPC slot `0` and FPC slot `11` are not NEBS compliant beyond 104°F (40°C). This is a cooling restriction.
LEDs	`OK/FAIL` LED, one bicolor: Steady green—MPC is functioning normally. Blinking green—MPC is transitioning online or offline. Red—MPC has failed. Enable/disable LED, one bicolor per port: Green—Port is enabled. Red—Port has failed. Off—Port is disabled. The enable/disable LEDs are arranged in four groups: `0/0` through `0/7` `1/0` through `1/7` `2/0` through `2/7` `3/0` through `3/7`