Active Member
|
[China]
Contact name:Fang
Shanghai Hengxiang Optical Electronic Co., Ltd. |
|
|
Heavy industrial encoder SC65F rotary encoder diameter 65mm 10000ppr with flange
Product Description
Our Service
Detail Specifications for SC65F rotary encoder
Items | Basic parameters |
Brand | HENGXIANG |
Encoder type | Incremental encoder |
External diameter | 65mm |
Protection grade | IP50 ; IP65 |
Cable length | 1M (cable length could be added appropriately by |
| require, but it need payment individually) |
Consumption current | 100mA MAX |
Top response frequency | 300KHZ |
Allowable ripple | ≤3%rms |
Load Voltage | ≤DC30V |
Insulation strength | AC500V 60s |
Insulation resistance | 10MΩ |
Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
Sock(endure) | 490m/s2 ,11 ms three times for X,Y,Z direction individually |
Shaft Material | Stainless steel |
Shell Material | die cast aluminum |
Cable length | 1000mm(cable with shielding) |
ENCODER TECHNOLOGY THEORY
An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
Questions you may like to know before ordering
Q: What’s your MOQ?
A: 1pcs
Q: How to order your encoder?
A: Contact us, or email us, we will reply you as soon as possible.
Q: Are you a factory or a trading company?
A: we are 100% factory with our brand.
Q: What’s your encoder product guarantee policy?
A: 1 year quality warranty and life-long technical support.
Q: Where can I download the encoder catalogue or datasheet?
A: You could visit our official website or email us directly to the latest files.
Q: What parameters are requested before ordering an encoder?
A: You should get some basic parameters before you start to order. Such as installation dimensions, resolutions, circuit signal, power supply voltage, etc.
If you have any doubt on selecting the model, you are welcome to contact us for more assistant.
Shipment
