1024PPR Push Pull Mechanical Panel Mount Encoder K66 30mm Hollow Shaft Encoder

K66 30mm hole shaft encoder manufacturer 1024PPR Push Pull Output Mechanical Panel Mount Encoder

Quick introduction of K66 encoder

Hollow shaft diameter: 25mm;28mm,30mm

Hollow shaft type: Through shaft

Resolution : 1024/8, 2048/8, 2500/8, 4096/8, 5000/8, 8192/8, 10000/8

Brand: HENGXIANG

Encoder type: Incremental encoder

Protection grade: IP50

Matters needing attention

1. Must choose the power supply voltage: DC5V or DC8-30V

2. Please advise the motor speed (RPM) that you actually use

3. If you have any other requirements, please provide detail parameters

K66 incremental encoder Product Information

Items	Basic parameters
Brand	HENGXIANG
Encoder type	Incremental Type
External diameter	66mm
Thickness	18.5mm
Hollow shaft type	Through shaft
Hollow shaft diameter	25mm, 28mm, 30mm
Resolution	1024/8, 2048/8, 2500/8, 4096/8, 5000/8, 8192/8, 10000/8
Output phase	Phase A+, B+, Z+, A-, B-, Z-, U+, V+, W+, U-, V-, W-
Supply voltage	DC5V;DC8-30V
Outlettype	Radial cable
Output mode	N=OC(DC5V&8-30V)
	C=TTL(DC5V)
	E=HTL(DC8-30V)
	S=TTL(DC5V)Less wiring type
Consumption current	120mA Max
Top response frenquency	100KHz, 500KHz, 800KHz
GND	not connect to encoder, must be effectively connected to GND
Slew speed	≤5000 rpm
Starting torque	Less than 50×10-3N.m
Intertia moment	Less than 70×10-6 kg.m2
Shaft load	Radial 40N; Axial 30N
Environmental temperature	Operating: -20~+95℃; Storage: -25~+100℃
Enviromental humidity	Operating and storage: 35~85%RH(noncondensing)
Rise. Fall Time	Less than 1us
Shell Material	Aluminium alloy
Protection grade	IP50
Cable length	1m (standard)
Certification	CE
Package	Carton
Net weight	About 180g

Production date

3-5 working days for sample after full paid

7-15 days for mass production after full paid

Signal Circuit of encoder

1. The NPN Open Collector -- The NPN Open Collector(NPN) is an interface based on an output circuit with an NPN transistor.

An open collector is the unconnected collector connection of an NPN transistor, whose emitter is connected to earth and whose collector is connected to the output.

2. PNP output

The PNP output is an interface based on an output circuit with a PNP transistor.

3. Push-Pull output(HTL)

High Voltage Transistor Logic functions with a voltage supply in the range 10 and 30 V DC, with 24 V DC being the most usual.

“Low” is defined as an output of between 0 V and 3 V and “high” as between VCC and VCC - 3.5 V.

4. TTL RS-422 output

In a transistor-transistor logic (TTL), both the logical status and the amplification are done by transistors, hence the name.

The TTL output is supplied with either a fixed 5 V voltage or a variable voltage of between 10 and 32 V. For this the low range is defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.

Production video

There are plenty of encoder video if you still have any doubts on encoder, please email us directly or contact online service right now.

At the same time, you could also visit our YOUTUBY page easily.

Most of the encoder series have videos for reference.