Reverse Power Supply Smart POE Switch Support 100m Data Transmission Distance

10 ports POE gigabit ethernet networking switch for voip , IP camera provide power supply with 2

gigabit ethernet ports and 8 fast ethernet ports

POE for power supply 

As useful as PoE has proven to be, it has become clear that the IEEE 802.3af standard falls short when it comes to certain demanding scenarios. Power sourcing equipment (PSE) with 802.3af PoE technology can only provide a maximum of 15.4 W of power to powered devices (PD). There are many Ethernet-connected devices, such as the following, that simply need more power:

PTZ/Outdoor Cameras: Low-power IP cameras are well-served by existing 802.3af PoE technology. However, cameras with Pan/Tilt/Zoom (PTZ) functionality are increasingly popular, and these cameras use more power in order to operate their motors. Cameras that are ruggedized for operations outdoors, especially in harsh conditions, also need more power in order to use their heating units. It would be nice to be able to use 802.3af PoE technology to supply power to each outdoor camera, but 802.3af just isn’t up to the task of providing enough power for these devices.

8-Port PoE Switch for IP Surveillance

IP surveillance was once affordable only by large enterprises, but it is now everywhere in our daily life. This is because the prices of IP camera and PoE switch have dramatically fallen down. In this case, many people try to set up small-sized IP surveillance systems by themselves. 10 - port PoE switch is one of the most popular PoE switches for simply IP camera system. This post will discuss how to use a 8-port PoE switch to build up IP surveillance camera system.

10 ports 10/100/1000M POE Switch is a Gigabit POE Switch,Which is cost-effective provide network layout need to simplify wireless access point (AP) and IP-based surveillance cameras network cameras in order to install in commercial network and home network. The devices far away from power socket are very suitable for hanging on the wall or ceiling. PoE eliminates the need for connecting these devices to power socket. So it make more flexible for those difficult to connect with AC power socket, and cut down the installation cost. It is ideal choice for those want to deploy a small commercial network and home network that use wireless access point (AP) and IP-based surveillance cameras.

Features

◆ IEEE 802.3af power on up to 8 ports
◆ Supply power to wireless access points and surveillance cameras over Cat-5 cabling
◆ 10*10/100/1000 Mbps Ports with AutoUplink™
◆ Supports PoE power up to 15.4W for each PoE port
◆ Supports PoE power up to 150W for all PoE ports
◆ Supports PoE IEEE 802.3af compliant PDs
◆ Supports IEEE 802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode
◆ 1K entry MAC address table of the PoE Switch with auto-learning and auto-aging
◆ LED indicators for monitoring power, link

◆ Support Vlan and Extend Function

◆ Internal power adapter supply

Specification 

Technical parameter list
Product Name	10-Ports AF PoE Switch with 8 PoE Ports and 2 Gigabit Uplink
Connector Type	10* 10/100/1000M copper cable RJ45 ports(8 PoE ports+2 Uplink)
Network Media	10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter)
Bandwidth	20Gbps (non-blocking)
Address Database Size	8K
MTBF	190,000 hours (about 21 years)
Forwarding Mode	Store-And-Forward
Network Protocols	IEEE 802.3i 10BASET; IEEE 802.3u 100BASETX; IEEE 802.3x Flow Control; IEEE 802.1af DTE Power via MDI; IEEE 802.3af
LED Display	System: power supply; Every Port: connecting, PoE working status
Power Supply	Power input: AC100-240V 50/60Hz; (every country use a custom power plug)
PoE Ports	Port 1-8 support POE
PoE Port Power	15.4W for each POE port
PoE Standard	IEEE 802.3af
Led indicator	Green: Ethernet Red:PoE
Working Environment	Operating Temperature: -20° ~ 55 ° C; Storage Temperature: -40 ° ~ 85 ° C; Operating Humidity: 10% ~ 95%, non-condensing
Certification	CE Mark ,commercial; CE/LVD EN60950, RoHS
Radiation	CE mark, commercial; FCC Part 15 Class B; VCCI Class B; EN 55022 (CISPR 22), Class B
Transmission Distance	Data transmission distance: 100m
Warranty	3 year warranty(1 yeas warranty for power adapter)