Chongqqing Rexon Oil Purification Co., Ltd |
|
Upgraded Standard Type Transformer Oil Regeneration Purifier 6000L/H SGS Pass
Why Need Rexon Oil Purifier?
There are contaminants in transformer oil as following:
1.Solid particles like rust scales, dust and fibres
2.Generation of carbon particles due to ageing of switchgear
3.Oil absorbs moisture resulting in free and dissolved water
4.Absorption of air
5.Aging fluids produce absorbed gases, causing equipment failure
and arc suppression in swithgear
6.Sludge formation
7.Increase in acidity level
8.Chemical products are caused by oxidation, as well as cross
contamination of other products.
Brief Introduction
Machine Condition: New
Treatment Capacity: 6000 L/H
Working Pressure: ≤0.4 Mpa
Place of Origin: Chongqing, China (Mainland)
Brand Name: REXON OIL PURIFICATION
Model Number: ZYD-100
Application: Transformer Oil
Power data: 380V 50HZ/3 Phase Or As Required
What ZYD-100 can do for you?
1.Removes water, trace water and acidity from oil completely
2. Remove impurities from transformer oil fast
3. Reduces combustible gases and oxygen to standard value
4. Improves oil dielectric values
5. Improves transformer power factor
6. Extends oil service life
7. Extends transformer service life and reliability
Oil Data After Process:
Impurity size after process: ≤1 micron
Gas content after process: ≤0.1%
Moisture content after process: ≤3 PPM
Advantages
Upgraded Standard Type Transformer Oil Regeneration Purifier,
comparing with the single-stage vacuum oil purifier, series ZYD
adds ROOTS vacuum system, second stage of separating system to
improve the effect of purification which dewaters, degases and
removes impurities more quickly, more completely and make the oils
limiting voltage-withstand value much higher. This machine also can
remove free, soluble water, carbon, free and dissolved gases and
particulate matters from insulating oil effectively and rapidly. As
the bridge-type vacuum linking system that can filter and be an
independent vacuum power supply, this machine can be vacuum
treating the electric insulating devices.
Technical Parameters
Parameters | Unit | ZYD-30 | ZYD-50 | ZYD-100 | ZYD-150 | ZYD-200 | ZYD-250 | ZYD-300 | |
Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 | |
Working Vacuum | Mpa | -0.08 ~-0.099 | |||||||
Working Pressure | Mpa | ≤ 0.3 | |||||||
Temp Range | ºC | 20 ~80 | |||||||
Power Supply | 380V, 50Hz, 3Phase( As per required) | ||||||||
Working Noise | Db | 60 - 80 (Depended on the configuation) | |||||||
Heating Power | KW | 30 | 60 | 90 | 135 | 150 | 165 | 180 | |
Total Power | KW | 35 | 67.5 | 101.5 | 149 | 164 | 198 | ||
Inlet/Outlet Diam | MM | 25 | 32 | 42 | 50 | 50 | 60 | 60 | |
Weight | KG | 450 | 550 | 750 | 950 | 1200 | 1850 | 2000 | |
Size | Length | MM | 1450 | 1450 | 1750 | 1850 | 1950 | 2050 | 2150 |
Width | MM | 950 | 1000 | 1250 | 1300 | 1350 | 1400 | 1450 | |
Height | MM | 1700 | 1750 | 1950 | 2000 | 2050 | 2100 | 2150 | |
AFTER TREATMENT | |||||||||
Dielectric Strength | KV | ≥ 75-85 | |||||||
Water Content | PPM | ≤ 3 | |||||||
Gas Content | % | ≤ 0.1 | |||||||
Particle Size | μ | ≤ 3 | |||||||
Cleanliness ≤NAS 1638 Grade 5 |
Rexon Customer Visit
Rexon Transformer Oil Purifier Onsite Use: