|
[China]
Trade Verify
Contact name:Catherine Hu
Jiashan PVB Sliding Bearing Co.,Ltd |
|
Verified Suppliers
|
|
|
PVB013 Steel Back PTFE lined Hydrualic Gear Pump Composite Plain Bushing
PVB013 hydraulic gear pump DU bushing is a kind of DU bushing
special designed for pumps. Hydraulic self lubricating bearing has
common structure with other DU bush. It's also called gear pumps DU
bushing, SF-1T Sliding Bearing.
Material Structure
1.PTFE Mixture 0.01~0.03mm as sliding layer
2.Porous bronze 0.2~0.3mm
3.Steel backing 0.7~2.3mm
4.Tin-plating 0.005mm or copper plating 0.008mm
Characteristics
New type material which is designed on the basic of PVB010 oiless
bearing
Low friction under oil lubricated condition.
Wear resistant and anti-impact.
Particularly applied for the high PV condition, at hydrodynamic
lubrication, similar performance with DP4 bushing
Availability
Standard cylindrical bushing, thrust washers and strips are
available.
Special designs are produced at short time
Lead free bushing is also available
Application
PVB013 self-lubricating bushing is the best choice for all kinds of
gear pumps plunger pumps, vane pumps and so on.
Technical Data
| Specific load capacity (static) | ≤ 250 [ N/mm ] | |
| Specific load capacity (dynamic) | ≤ 140 N/mm at low speeds | |
| Friction value | 0.04 to 0.2 | |
| Temperature | -195 to +280 [ °C ] | |
| Max. sliding speed | 3m/s | |
| Max. Pv (dry) | 3.8N/mm2.m/s | |
| Max. Pv (lubrication) | 50N/mm2.m/s | |
Tolerance Details
Housing ØH7
Bushing inner-Ø after mountingH9
Shaft tolerancef7 to h8
Mouting Suggestion
Housing: Mounting bevel min. 1.5 mm x 15-45°
Shaft Material:Steel, hardened or untempered, surface roughness ≤ Rz 2-3
Shaft: Mounting bevel 5 mm x 15°, edges rounded
The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.
