|
[China]
Trade Verify
Contact name:Catherine Hu
Jiashan PVB Sliding Bearing Co.,Ltd |
|
Verified Suppliers
|
|
|
PVB035 Friction-Welded Track Roller Bimetal Bushings
PVB035 friction welding bimetal bearing is made of bimetal rolling bearing and bimetal thrust washer by welding. This type of bimetal bush adopts copper alloy at the sliding part in contact with the shaft, which can provide good lubrication and protection to the shaft during use. The steel back has stronger bearing capacity and further reduces material costs.It is also called Flanged bimetal bush
Material Structure
1.Sinter bronze with graphite-- Liner material: CuPb10Sn10 .Good wear resistance with lower friction and excellent load carrying capacity. Bimetallic bushing can be machined after fitting to get precision tolerance. We also can supply the bearings with PTFE or graphite sprayed layer on the work surface to get much lower start friction.
2. Metal backing --low carbon steel: gives exceptionally high load carrying capacity, excellent heat dissipation.
Characteristics
Application
PVB035 Track roller bimetal bushing is widely used for construction machinery, such as track roller, carrier roller, idler of bulldozers, excavators and wheel loader
Technical Data
| Materail | Steel+CuPb10Pb10 |
| Alloy layer hardness HB | 80-120HB |
| Max dynamic Load P N/mm² | 150 |
| Max.Speed V m/s(Greased) | 3.5 |
| Max.PV limit N/mm²·m/s(Greased) | 2.8 |
| Friction Coefficient u(Greased) | 0.05-0.10 |
| Max.Speed V m/s(Oil Lubrication) | 8 |
| Max.PV limit N/mm²·m/s(Oil Lubrication) | 10 |
| Friction Coefficient u(Oil Lubrication) | 0.04-0.12 |
| Max temperature ℃(Greased) | 150℃ |
| Max temperature ℃(Oil Lubrication) | 250℃ |
| Thermal conductivity W/mk | 60 |
| Coefficient of linear expansion | 18×10-6/K﹣¹ |
| Match the axis hardness HRC | ≥53 |
| Match the axis roughness Ra | 0.32~0.63 |
Tolerance Details
Housing ØH7
Bushing inner-Ø after mountingH9
Shaft tolerancef7
Mounting Suggestion
Housing: Mounting bevel min. 1.5 mm x 15-45°
Shaft Material:Steel, hardened or untempered, surface roughness ≤ Rz 6.3
Shaft: Mounting bevel 5 mm x 15°, edges rounded
The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting
Why Choose US
More than 15 years experience Advanced QC checking equipments
Professional manufacturer and exporter Professional QC checking team
Professional production team, high quality Customer focus sales team
Automatic bulk produce, high efficiency Perfect customer service
