Active Member
|
[China]
Address: Room 112, Workshop 1, Cross-Border E-Commerce Industrial Park, Comprehensive Bonded Zone, Zhengzhou Port New Area, Mashanshan, Anhui, China
Contact name:calvin
Maanshan Ruizi Energy Technology Co., Ltd. |
|
|
12V65AH Deep Cycle Battery Discharge Deep Cycle Long Life Battery Lead Acid Battery fusion deep cycle battery
| NominalVoltage | 12V | |
| Nominal Capacity(10HR) | 65AH | |
| Dimension | Length | 347 ±3mm (13.66 inches) |
| Width | 168 ± 2mm (6.61 inches) | |
| Container Height | 168 ± 2mm (7.61 inches) | |
| Total Height (withTerminal) | 176 ± 2mm (6.93 inches) | |
| Approx Weight | Approx 19.1 Kg (42.1Ibs) | |
| Terminal | T6 / T10 | |
| Container Material | ABS | |
| Rated Capacity | 67.9 AH/3.39A | (20hr ,1.80V/cell,25℃/77℉) |
| 65.0 AH/6.50A | (10hr,1.80V/cell,25℃/77℉) | |
| 56.2 AH/11.2A | (5hr,1.75V/cell,25℃/77℉) | |
| 51.0 AH/17.0A | (3hr,1.75V/cell,25℃/77℉) | |
| 39.9 AH/39.9A | (1hr,1.60V/cell,25℃/77℉) | |
| Max. Discharge Current | 780A (5s) | |
| Internal Resistance | Approx 7.4 mΩ | |
| Operating Temp.Range | Discharge : -15~50℃ (5 122℉) | |
| Charge : 0 40℃ (32 104℉) | ||
| Storage : -15 40℃ (5 104℉) | ||
| Nominal Operating Temp. Range | 25± 3℃ (77± 5℉ ) | |
| Cycle Use | Initial ChargingCurrent lessthan19.5A.Voltage | |
| 14.4V~14.9V at 25℃(77℉)Temp. Coefficient -30mV/℃ | ||
| Standby Use | No limit on Initial Charging Current Voltage | |
| 13.5V~13.8V at 25℃(77℉)Temp. Coefficient -20mV/℃ | ||
| Capacity affectedby Temperature | 40℃ (104 ℉) 103% | |
| 25℃ ( 77 ℉ ) 100% | ||
| 0℃( 32℉ ) 86% | ||
| Self Discharge | batteries may be stored for up to 6months at 25℃ (77℉)and battery
should be recharge before use. For higher temperatures the time interval will be shorter. | |
| Warranty | |
| FULL SETS SYSTEM | 1years |
| Solar | 12years products on materials 25years liner power performance |
| Inverter | High frequency 1year Low frequency 2years |
| GEL battery | 1year |
| MPPT CONTROLLER | 1YEAR |
| LI battery | 3years |
| GRAPHENE battery | 5years |
Q1:May I take some samples to test before placing the order ?
A1:Yes, welcome to take some sample to test!
Q2:How about the delivery time?
A2:7 days for sample; 25 days for bulk order.
Q4:How to solve the technical problems?
A4:24 hours after-service consultancy just for you and to make your
problem to be solved
Q5:Do you have any certifications for your products?
A5:We have ISO9001:2000, CE, RoHS, certificates for all of our
products.
