|
[China]
Trade Verify
Address: CN , Guangdong , Shenzhen , Floor 501, Building P, No. 17, Chuangxin Industrial Park, Xintian Community, Guanhu Street, Longhua District
Contact name:Andy Lee
Shenzhen Sinoseen Technology Co., Ltd |
|
Verified Suppliers
|
|
|
USB Camera Module
This is a full featured HD 1080p/720p camera module with OV2735 sensor. Refers to devices that support IP cameras, HD analog cameras, or 1080p video capture at 30fps. Support low power consumption mode, maintain stable image quality in the operating temperature range of 0"C to 60%C, and significantly reduce power consumption. This module can be programmed to control: gain, exposure, frame rate, image size, horizontal mirroring, Vertical flip, crop and window.
Module No | SNS-WK2735-V1.0 |
Pixel Size | 3.0μm x 3.0μm |
Effective Pixels | 1920(H)X1080(V) |
Video output | YUV2 MJPG |
Active Array Size Video Rate | 1080p@30FPS |
Image Sensor | 1/2.7" OV2735 |
SNR max | TBDdB |
Dynamic range | TBDdB |
OTG | USB2.0 OTG |
AEC | Support |
AEB | Support |
AGC | Support |
Adjustable parameter | Brightness/Contrast/Color saturation/Hue/Definition/Gamma/White balance/Exposure |
Lens view | FOV:D97° H83°V56°F/N(2.0) |
Interface | USB BUS POWER 5P-1.25mm |
Operating Voltage | DC5V |
Operating Current | MAX120MMA |
Operating temperature | 0～60℃ |
Storage temperature | -20～80℃ |
Cable length | Defualt |
OS | WinXP/Vista/Win7/Win8 Linux with UVC(above linux-2.6.26) MAC-OS X 10.4.8 or later Wince with UVC Android 4.0 or above with UVC |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application
scenarios, resolution, size, and lens requirements. We will have a
professional team of engineers to assist you in choosing the most
suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to
confirm the details with you. Once the drawing is confirmed, we
will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it
is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we
will send the samples to you via DHL FedEx UPS or any other courier
methods, usually within a week.
