|
[China]
Trade Verify
Address: CN , Guangdong , Shenzhen , Floor 501, Building P, No. 17, Chuangxin Industrial Park, Xintian Community, Guanhu Street, Longhua District
Contact name:Andy Lee
Shenzhen Sinoseen Technology Co., Ltd |
|
Verified Suppliers
|
|
|
High Frame Rate 2MP 1080p UVC Camera Module 60FPS SmartSens SC2315 Sensor
60FPS HFR High Frame Rate 2MP 1080p UVC Plug And Play Drive Free USB Camera Module
2MP 1080p Camera Module
This is a very good and cheap camera module. The biggest advantage
of this camera module is that it supports a high frame rate of
60FPS at full resolution (1920x1080), while most similar products
can only support it at 1920x1080 resolution.
The size of the camera module and the FOV of the lens, other
parameters can be customized according to your requirements
Specification
Model No | SNS-2MP-SC2315-S1 |
Sensor | 1/2.7’’ SmartSens SC2315 CMOS |
Pixel | 2 Mega Pixel |
Most effective pixels | 1920(H) x 1080(V) |
Pixel Size | 3.0µm x 3.0µm |
CRA | 12° |
Chroma | Color |
Compression format | MJPEG / YUV2 (YUYV) |
Resolution & Frame rate | See above |
Shutter Type | Electronic rolling shutter |
Focus type | Fixed focus |
S/N ratio | 42dB |
Dynamic range | 82dB |
Sensitivity | 4800mV / lux-sec |
Interface type | USB2.0 |
Adjustable parameter | Brightness/Contrast/Color saturation/Hue/Definition/ |
Lens | Focal length: 3.6mm |
Lens Size: 1/2.7 inch | |
FOV: 85° | |
Thread Size: M12*P0.5 | |
Audio frequency | Optional |
Power supply | USB BUS POWER |
Power consumption | DC 5V, 190mA |
Main chip | DSP/SENSOR/FLASH |
Auto Exposure Control (AEC) | Support |
Auto White Balance (AEB) | Support |
Auto Gain Control (AGC) | Support |
Dimension | 38MM x 38MM (32MM x 32MM) |
Storage temperature | -20°C to 70°C |
Operating temperature | 0°C to 60°C |
USB cable length | Default |
Support OS | WinXP/Vista/Win7/Win8/Win10 |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application
scenarios, resolution, size, and lens requirements. We will have a
professional team of engineers to assist you in choosing the most
suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to
confirm the details with you. Once the drawing is confirmed, we
will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it
is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we
will send the samples to you via DHL FedEx UPS or any other courier
methods, usually within a week.
