|
[China]
Trade Verify
Address: CN , Guangdong , Shenzhen , Floor 501, Building P, No. 17, Chuangxin Industrial Park, Xintian Community, Guanhu Street, Longhua District
Contact name:Andy Lee
Shenzhen Sinoseen Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Low Illumination 2MP Night Vision Camera Module With SONY IMX307 Sensor
Low Illumination 2MP USB Camera Module With SONY STARVIS IMX307 Sensor
Among the many night vision camera modules, this can be regarded as a relatively cheap and effective night vision camera module. We call it the low-profile version of IMX291. It also uses the IMX307 chip from Sony. Although the night vision effect is not comparable to IMX291, it is not much worse, especially when using our optimized firmware. Very good performance under illuminance environment. Most importantly, it is cheaper than IMX291.
In addition, it has some other advantages, such as low power consumption and high sensitivity. If you need a low-light camera module that performs well and don't want to spend too much money, then IMX307 will be a very good choice.
Specification
Model No | SNS-2MP-IMX307-V1.0 |
Sensor | 1/2.8’’ SONY IMX307 CMOS |
Pixel | 2 Mega Pixel |
Most effective pixels | 1920(H) x 1080(V) |
Pixel Size | 2.9µm x 2.9µm |
Image area | 1937(H) x 1097(V) |
Compression format | MJPEG / YUV2/H.264 |
Resolution & Frame rate | 1920 x1080 @ 60fps 1280x960 @60fps 1280x720 @ 60fps 800x600 @ 60fps 640x480 @ 60 fps 320x240 @ 60fps |
Shutter Type | Electronic rolling shutter |
Focus type | Fixed focus/Manually adjustable |
S/N ratio | 52dB |
Dynamic range | 72dB |
Sensitivity | 7757 mV / lux-sec |
Interface type | USB2.0 and SPI |
Adjustable parameter | Brightness |
Lens | Optical length: 18.6mm |
| F/NO: 2.4 |
| FOV: D=130° |
| Thread Size: M12*P0.5 |
Audio frequency | Optional |
Power supply | USB BUS POWER |
Power consumption | DC 5V, 260mW |
Main chip | DSP/SENSOR/FLASH |
Auto Exposure Control (AEC) | NOT Support |
Auto White Balance (AEB) | NOT Support |
Auto Gain Control (AGC) | NOT Support |
Dimension | 32mm x 32mm |
Storage temperature | -20°C to 70°C |
Operating temperature | 0°C to 60°C |
USB cable length | Default |
Support OS | WinXP/Vista/Win7/Win8/Win10 |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application
scenarios, resolution, size, and lens requirements. We will have a
professional team of engineers to assist you in choosing the most
suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to
confirm the details with you. Once the drawing is confirmed, we
will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it
is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we
will send the samples to you via DHL FedEx UPS or any other courier
methods, usually within a week.
