|
[China]
Trade Verify
Address: No.208,Lvdi Road,Baihe Town,Qingpu District,Shanghai,China
Contact name:
TOBO STEEL GROUP CHINA |
|
Verified Suppliers
|
|
|
Seamless 90 EL, OD 4" WT =3 mm BW TO B16.9, EEMUA 146 SEC.1 90-10 Cu-Ni, BS ALLOY CN102
| Product Name | Seamless 90 EL, OD 4" WT=3 mm BW TO B16.9, EEMUA 146 SEC.1 90-10 Cu-Ni, BS ALLOY CN102 | |
| BIS/API/PED | ||
Material |
ASTM | Carbon steel(ASTM A234WPB,,A234WPC,A420WPL6. |
Stainless steel(ASTM A403 WP304,304L,316,316L,321. 1Cr18Ni9Ti, 00Cr19Ni10, 00Cr17Ni14Mo2, ect.) | ||
| Alloy Steel:A234WP12,A234WP11,A234WP22,A234WP5, A420WPL6,A420WPL3 | ||
DIN | Carbon steel:St37.0,St35.8,St45.8 | |
| Stainless steel:1.4301,1.4306,1.4401,1.4571 | ||
| Alloy steel:1.7335,1.7380,1.0488(1.0566) | ||
JIS | Carbon steel:PG370,PT410 | |
| Stainless steel:SUS304,SUS304L,SUS316,SUS316L,SUS321 | ||
| Alloy steel:PA22,PA23,PA24,PA25,PL380 | ||
GB | 10#,20#,20G,23g,20R,Q235,16Mn, 16MnR,1Cr5Mo, 12CrMo, 12CrMoG, 12Cr1Mo | |
| Standard Specification | ASTM,JIS,BS,DIN,UNI etc. | |
| Qualification | ISO9001, API,CE | |
| Equipment | Pushing Machine,Beveling Machine,Sand Blasting Machine | |
| Pressure | Sch5--Sch160,XXS | |
| Standard | ASME,ANSI B16.9; DIN2605,2615,2616,2617,JIS B2311 ,2312,2313; EN 10253-1 ,EN 10253-2 | |
| Minimum Order Quantity | 1pcs | |
| Supply Ability | 3,0000pcs per month | |
| Price | Depending on quantity | |
| Supply Ability | 3,0000pcs per month | |
| Packing | PLY-wooden case or pallet or as for clients' requirements | |
| Application | Petroleum, chemical, machinery, electric power, shipbuilding, papermaking, | |
Advantages | 1. 32 + years of production experience at your service. 2. The fastest delivery 3. The lowest price 4. Most comprehensive standards and materials for your choice. 5. 100% export. 6. Our products EXPORT to Africa, Oceania, mid east, eastern Asia, Western Europe etc. | |
Introduction
Elbow is a commonly used connecting pipe fitting in plumbing installation. It is used for the connection at the bend of the pipeline and to change the direction of the pipeline.
Other names: 90 ° elbow, right angle bend, love bend, stamping elbow, pressing elbow, machine-made elbow, welding elbow, etc.
Purpose: connect two pipes with the same or different nominal diameter to make the pipeline turn 90 °, 45 °, 180 ° and various degrees.
Bending radius less than or equal to 1.5 times of pipe diameter belongs to elbow, and bending radius greater than 1.5 times of pipe diameter belongs to elbow
Overview and features
Cuni90-10 copper nickel alloy pipe fittings are not easy to be corroded, and are resistant to high temperature and high pressure. They can be used in a variety of environments. Compared with this, the shortcomings of many other pipes are obvious. For example, galvanized steel pipes used in houses in the past are very easy to rust, and problems such as yellowing of tap water and smaller water flow will occur after a short time of use. The strength of some materials will decrease rapidly at high temperature, which will cause unsafe hazards when used in hot water pipes. The melting point of copper is as high as 1083 degrees Celsius, and the temperature of hot water system is insignificant for nickel white copper pipes. Copper nickel alloy has the characteristics of high strength, corrosion resistance, high hardness, low resistance and thermoelectricity, and can also reduce the temperature coefficient of resistivity. Therefore, the mechanical properties of copper nickel alloy are several times better than other copper alloys.
Q1: Are you trading company or manufacturer ?
A: We are factory.
Q2: How long is the delivery ?
A: 15-30 working days
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
If you want to get more information of the products, send me e-mail or by skype, whatsapp etc.
.
If any questions,you can call me mobile phone at any times:0086-15710108231
