Home Companies TOBO STEEL GROUP CHINA

Weldolet, 36"x2" ,Sch: S-STD/S-STD Ends: BW ,Material: Forged-ASTM A105 -.

Contact Us

[China]

Trade Verify

Address: No.208,Lvdi Road,Baihe Town,Qingpu District,Shanghai,China

Contact name:

TOBO STEEL GROUP CHINA

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Weldolet, 36"x2" ,Sch: S-STD/S-STD Ends: BW ,Material: Forged-ASTM A105 -.

Country/Region	china
City & Province	shanghai shanghai

Product Details

Weldolet, Diam:36"x2" ,Sch: S-STD/S-STD Ends: BW ,Material: Forged-ASTM A105 -.

Weldolet, Weldolet, Diam:36"x2 ,Sch: S-STD/S-STD Ends: BW ,Material: Forged-ASTM A105 -.

		ISO 9001 cerfiticate for special steel fittings
1	Product:	Forged socket welding/weld SW NPT threaded/screwed pipe fittings,
		90deg / 45deg elbow, tee ,cross, cap,reducer,
		full / half / reducing coupling, swage , union, (hex square round head) plug, hex head / flush bushing, reducing/reducer inserts, boss, bull plug
		Weldolet sockolet threadolet elbolet, flangolet latrolet, sweepolet,nipolet, coupolet,
2	size:	1/8''~4''
3	Class:	3000LBS 6000LBS 9000LBS
3	Standard:	1. ASME B16.11 Forged Fittings,Socket Welding and Threaded elbow tee cross cap coupling half-coupling square/hex/round head plug, hex head/flush bushing
		2. MSS SP-83 Class 3000 Steel Pipe Unions, Socket-Welding and Threaded
		3. MSS SP-79 Socket Welding Reducer Inserts
		4. MSS SP-95 Swage(d) Nippl es and Bull Plugs
		5. MSS SP-97 forged weldolet sockolet threadolet
4	Material:	Stainless / duplex stainless ;
4	Material:	nickel alloy monel inconel incoloy hastelloy nimonic
5	Stainless:	304 304L 316 316L 317 317L 321 321H 316ti 347 347H 310S 309S 310 309
5	Stainless:	ASME SA-182 ASTM A182 F304, F304L, F316, F316L, F309H, F310, F310H, ASTM A182 F317, F317L,F321, F321H, F347, F347H, F310MOLN, F316ti
6	Duplex stainless:	astm a182 F51 F53 F44 F55 F60 F61 F62 F56 F58 F904L F310MoLn F20;
		Duplex 2205/UNS S31803/1.4462; duiplex 2507/UNS S32750/1.4410;
		UNS S32760/1.4501; 904L/UNS N08904/1.4539
		254SMO/UNS S31254/1.4547; 725LN/310Moln/UNS S31050/1.4466
		UNS S32205; alloy 255/UNS S32550; alloy 6xn/AL-6XN/AL6XN/UNS N08367/1.4529;
		316Lmod/1.4435;
7	Lead time:	10~30 days according to qty
8	Packing :	Plywood cases or wooden box
9	Usage:	Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc
10	Exported countries:	United States, Germany, Saudi Arabia, South Korea,etc.
11	Test:	In house and the 3rd party to test (SGS/TUV/BV etc)
12	Advantages:	Excellent quality and in-time delivery
14	Other products:	1. ASME B16.9 Butt welding/weld BW pipe fittings 90deg/45deg elbow equal/reducing tee concentric/eccentric reducer equal/reducing cross cap lap joint stub ends 180deg return bend lateral tee
		2. ASME B16.5 WN welding neck SO slip on welding Blind SW socket welding threaded lapped flange
		3. MSS SP-97 weldolet sockolet threadolet
		4. ASME B16.48 spectacle blind / blank flange, figure-8 blank, Paddle blank and paddle spacer

As a kind of branch pipe support, the branch pipe support is a kind of reinforced pipe fitting widely used in foreign countries in recent years. It replaces the traditional branch pipe connection types such as reducing tee, reinforcing plate and reinforced pipe section. It has the outstanding advantages of safety and reliability, reducing cost, simple construction, improving medium flow channel, series standardization and convenient design selection, especially in high pressure, high temperature, large diameter and thick wall pipes, Replace the traditional branch pipe

Carbon steel is an iron carbon alloy with carbon content of 0.0218% ~ 2.11%. Also called carbon steel. Generally, it also contains a small amount of silicon, manganese, sulfur and phosphorus. Generally, the higher the carbon content in carbon steel, the greater the hardness and strength, but the lower the plasticity.

Common steel grades and uses:

08F, low mass fraction of carbon, good plasticity and low strength, used for stamping parts such as automobile and instrument shell;

20. Good plasticity and weldability, used for parts with low strength requirements and carburized parts, such as hood, welded container, small shaft, nut, washer and carburized gear;

45, 40Mn, with good comprehensive mechanical properties after quenching and tempering, is used for mechanical parts with large stress, such as gears, connecting rods, machine tool spindles, etc;

60 and 65Mn steel have high strength; Used for manufacturing various springs, locomotive rims and low-speed wheels

Q1: Are you trading company or manufacturer ?

A: We are factory.

Q2: How long is the delivery ?

A: 15-30 working days

Q3: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

If you want to get more information of the products, send me e-mail or by skype, whatsapp etc.
.

If any questions,you can call me mobile phone at any times:0086-15710108231