|
[China]
Trade Verify
Address: Fudong Village, Dingshu Township, Yixing City
Contact name:Zhou
Yixing Dingfan New Energy Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Corrosion-Resistant High Temperature 1J79 Round Bar And Strip
Product Details
1J79 alloy is an iron-nickel soft magnetic alloy. It has the characteristics of high permeability and low coercivity. It is widely used in electromagnetic wave shielding and electromagnetic compatibility with magnetic field characteristics. However, the magnetic properties of the 1J79 soft magnetic alloy are very sensitive to stress, and it is impossible to avoid the influence of stress in practical applications, such as material winding, extrusion, etc., which will affect the magnetic permeability of the material. The influence of stress on the magnetic permeability of materials has been paid more and more attention by people. When a ferromagnetic material is subjected to mechanical force, strain is generated in its interior, resulting in stress staring and changes in the magnetic permeability range. When a ferromagnetic material is magnetized, if it is restrained from stretching, stress will be generated inside. Likewise, externally applied forces also generate stress, which has long been considered an important factor affecting the magnetic properties of ferromagnetic materials. It is pointed out in the literature that the influence of stress on permeability can be eliminated or reduced after the material undergoes proper processing. However, the previous research mainly focused on the change of the magnetic permeability of the material under weak magnetic field. In recent years, the problem of strong field shielding has been paid more and more attention. There is no research report on the change of the magnetic permeability of the 1J79 alloy before and after the stress in the strong magnetic field.
(Common name: Ni79Mo4, Permalloy, 79HM)
Similar to the brand
| GB/T | AISI/ASTM |
| 1J79 | Alloy4 |
Chemical composition:
| Brand | % | Ni | Fe | C | Mn | Si | P | S | Cu | Mo |
| 1J79 | Min | 78.5 | - | 0.6 | 0.3 | 3.8 | ||||
| Max | 80.5 | 0.03 | 1.1 | 0.5 | 0.020 | 0.020 | 0,20 | 4.1 |
Physical properties of 1J79
| The density | 8.6 g/cm3 |
| Curie point | 450℃ |
Mechanical properties of alloys at room temperature
| Brand | Varieties | magnetic | |||
Initial permeability μO(mH/m) | Maximum permeability μm(mH/m) | Coercive force Hc (A/m) | Saturation magnetic induction intensity Bs(T) | ||
| 1J79 | cold-rolled belt | ≥31 | ≥250 | ≤1.2 | 0.75 |
Forged (rolled) rod and plate | ≥25 | ≥125 | ≤2.4 | 0.75 | |
AC Magnetic Properties of Soft Magnetic Alloys with High Initial Permeability
| Alloy grade | level | product | thickness/mm | Elastic permeability at different frequencies when the peak value of the magnetic field strength is 0.1A/m µm(mH/m) | |||
| 60Hz | 400Hz | 1KHz | 10KHz | ||||
| not less than | |||||||
| 1J79 | Cold rolled strip | 0.02 | - | - | 14000(17.5) | 10000(12.5) | |
| 0.05 | - | - | 15040(18.8) | 7520 (9.4) | |||
| 0.10 | - | 18000(22.5) | 12000(15) | - | |||
| 0.20 | - | 10000(12.5) | 6000(7.5) | - | |||
| 0.35 | 25 | 7040(8.8) | - | - | |||
Main chemical composition (%)
| Alloy grade | Mn | Si | Ni | Cr | Mo | Cu | Fe |
| 1J76 | 0.30~0.60 | 0.15~0.30 | 75.0~76.5 | 1.80~2.20 | - | 4.80~5.20 | margin |
| 1J77 | 0.30~0.60 | 0.15~0.30 | 75.5~78.0 | - | 3.90~4.50 | 4.80~6.00 | margin |
| 1J79 | 0.60~1.10 | 0.30~0.50 | 78.5~80.0 | - | 3.80~4.10 | ≤0.20 | margin |
| 1J80 | 0.60~1.10 | 1.10~1.50 | 79.0~81.5 | 2.60~3.00 | - | ≤0.30 | margin |
| 1J85 | 0.30~0.60 | 0.15~0.30 | 79.0~81.0 | - | 4.80~5.20 | ≤0.20 | margin |
| 1J86 | ≤1.00 | ≤0.30 | 80.5~81.5 | - | 5.80~6.20 | - | margin |
Features and applications of 1J79
Transformers, transformers, magnetic amplifiers, choke cores and magnetic shielding with high initial permeability and operating in a weak magnetic field.
Product display
Shipping packaging
Production Process
FAQ
1.Are you trading or manufacturer ?
We are company,and we have our own factory
2.How long is your delivery time?
| Quantity(kilograms) | 1 - 500 | >500 |
| Est. Time(days) | 10 | To be negotiated |
3.Do you provide samples ? is it free or extra ?
Yes, we could offer the sample for free charge but do not pay the
cost of freight.
If you have another question, pls feel free to contact us
