Active Member
|
[China]
Address: Tai zhong industrial garden ,ail LianLongGang District, Shenzhen China
Contact name:
ShenZhen Necom Telecommunication Technologies Co., Ltd. |
|
|
Two-Way Remote Control Signal Jammer/Black Aluminum Case Remote Control Jammer for 433MHz315MHz
Description:
Two-way remote control signal shield, black housing with two antennas, one is 433MHz, one is 315MHz, the coverage of this wireless signal shield can reach 100M because each of the shields is a point signal, Therefore, this output power is also a single-to-one signal of 433MHz or 315MHz. The size is small and can be held in a pocket or in a pocket. The black aluminum case has good heat dissipation performance. With built-in lithium battery, it can be used for two hours after charging, or it can be used while charging.
Parameter:
| Operating voltage | DC9V (built-in rechargeable lithium battery (800mAh)) |
| Operating current | 240mA (dual frequency) |
| Working frequency | 315/433 MHz |
| Coverage radius | 30-100M |
| Dimensions | 210*60*25MM (including antenna) |
| Power adapter | DC9V/1A |
| Colour | Black |
| Material | Aluminum Alloy |
Instructions:
1.Open the package and screw the instrument antenna to the antenna socket on the back of the instrument. Tighten to prevent abnormal operation.
2.You need to charge 3-4 hours before you can use it. The factory power of the product is only about 50%. (Low battery will directly affect the use of results)
3.Press the side power switch, the blue indicator light, the monitor emits 315MHz,433MHz wireless signal. That is, press the side power switch again, the blue indicator will turn off and the monitor will stop working.
4.Frequency default ANT1 is 315MHz, ANT2 is 433MHz. (from left to right)
Precautions:
1. Never use a non-dedicated power adapter to plug into the power input
2. There is danger of electricity in the host, please do not open the back cover to avoid electric shock and affect the warranty.
3. Turn off the power and unplug the power plug when you are not using it for a long time or when you are away for a long time.
4. Please use in a suitable shielded environment, so as not to affect the use of effects.
5. Avoid exposure, rain, water droplets, long-term exposure to high temperature and humidity.
6. The effective range of the instrument is a circular area centered on the main unit. Therefore, when using it, be careful to select the correct position of the instrument to avoid blind corners.
7. This product is a sensitive instrument for remote control products. It will shield the remote control signals such as electric cars, automobiles, remote control doors, access control, etc. Please use it rationally.
