Digital Metal Hardness Tester RHL-TH130
Advantages
- Large screen(128×64 dot matrix LCD), showing all functions and
parameters.
- Test at any angle, even upside down.
- Wide measuring range. It can measure the hardness of all metallic
materials. Direct display of hardness scales HRB, HRC, HV, HB, HS,
HL and three types of strength values immediately.
- Seven impact devices are available for special application.
Automatically identify the type of impact devices.
- Large capacity memory could store 1000 groups (Relative to average
times32~1 ) information including single measured value, mean
value, testing data, impact direction, impact times, material and
hardness scale etc.
- Upper and lower limit can be preset. It will alarm automatically
when the result value exceeding the limit.
- Battery information indicates the rest capacity of the battery and
the charge status.
- User calibration function.
- USB port with the PC humanity multi-functions data proceeding
software.
- Original imported high speed thermal printer support the immediate
printing function. It can save data permanently.
- NI-MH rechargeable battery as the power source. Charge circuit
integrated inside the instrument. Continuous working period of no
less than 150 hours (EL off and no printing).
- Auto power off to save energy.
- Excellent after-sale service system for high quality products---two
years’ guarantee and all life maintenance. Easy to buy and
comfortable to use.
Main Application
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other
equipment
- Heavy work piece
- The installed machinery and permanently assembled parts
- Testing surface of a small hollow space
- Material identification in the warehouse of metallic materials
- Rapid testing in large range and multi-measuring areas for
large-scale work piece
Technical Specifications
- Measuring range:HLD(170~960)HLD
- Measuring direction:360°
- Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS
- Display:dot matrix LCD,128×64 dots
- Data memory: 500 groups max.(relative to impact times 32~1)
- Printing paper: width is (57.5±0.5)mm, diameter is 30mm
- Battery pack: 6V NI-MH
- Battery charger: 9V/500mA
- Continuous working period:about 150 hours(With backlight off, no
printing)
- Communication interface:USB1.1
- Outline dimensions:212mm×80mm×32mm
Configuration
| No. | Item | Quantity | Remarks |
Standard Configuration | 1 | Main Unit | 1 | |
2 | D type impact device | 1 | Without cable |
3 | Standard test block | 1 | |
4 | Cleaning brush (I) | 1 | |
5 | Small support ring | 1 | |
6 | Battery Charger | 1 | 9V 500mA |
7 | Manual | 1 | |
8 | DataPro software | 1 | |
9 | Communication cable | 1 | |
10 | Instrument case | 1 | |
11 | Calibration certificate | 1 | |
Optional accessories | 12 | Cleaning brush (II) | 1 | For use with G type impact device |
13 | Other type of impact devices and support rings | | Refer to Table 3 and Table 4 in the appendix. |
Extra function can be added:
OLED screen
Extension cable for different impact device such as C, DL, DC,.
Bluetooth function
Printer
Conatact Person: | Esther Yu Scan here for my name card |
---|
Mobile Phone: | 0086-13910983110 |
---|
Whatsapp: | +86 18846112524 |
---|
Skype: | cindydon |
---|
Address : | 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng
Haidian Dist.BeiJing,CHINA 100096 |
---|
Worktime : | 9:00-18:00(Beijing time) |
---|
Business Phone: | 86-10-82921131(Working time) 86-13910983110(Nonworking time) |
---|
Fax : | 86-10-82916893 |
---|