|
[China]
Trade Verify
Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096
Contact name:Shifen Yuan
HUATEC GROUP CORPORATION |
|
Verified Suppliers
|
|
|
TG-5100D Real time A Scan and B Scan Through Coating Ultrasonic Thickness Gauge
This ultrasonic thickness gauge developed and produced by our company uses OLED true color screen, built-in real time A-SCAN & B SCAN and thickness measurement through coating, large capacity data storage and other functions, and uses the ultrasonic measurement principle, is a high precision,high resolution portable industrial nondestructive testing instrument.
The instrument can be widely used in manufacturing, metal processing industry, chemical industry, commodity inspection industry and other testing fields. In addition to a variety of plates and various processing parts for accurate measurement, can also be used to monitor the production of various pipes and pressure vessels in the process of use, monitoring their corrosion after the thinning degree, is the nondestructive testing industry necessary instruments.
A-SCAN snapshot function, which can help users to better control the measurement and avoid the error measurement caused by the factors of the material itself. When there is a coating or paint layer on the surface of the material under test, the actual thickness of the substrate of the workpiece can be obtained without grinding and destroying the surface coating.
Main functional features
1. Simple single-level parameter configuration menu
2. Real time A- scanning. The user can see the ultrasonic signal
waveform directly on the screen, which is used to verify the
thickness reading is correct, analyze the cause of the problem, and
help the user find a solution to the problem.
3. When the probe is coupled with the workpiece, the thickness
value is displayed in white font.
4. Thickness alarm: alarm thickness limit can be set, and the color
of thickness reading can be dynamically changed during alarm.
5. Maximum mode: capture the maximum and minimum values in the
measurement process
6. Difference mode: Obtain the difference between the current
thickness measurement value and the nominal thickness and the
percentage of difference value and the nominal thickness
7. Support millimeter and inch thickness units
8. Large capacity data storage function: can store 100,000
thickness values
9. Can penetrate the coating on the surface of the workpiece,
directly measure the thickness of the substrate
10. The user can choose the measurement resolution in metric system
x. XX and X.X, and in British system x. XX and X.X
11. Multi-language interface is optional
12. Standby time up to 35 hours
Technical parameters
| 2.4 inch TFT QVGA(320×240) color OLED screen with contrast ratio of 1010:1 | |
| working principle | Ultrasonic pulse/echo/Echo method using double Crystal probe |
| Measuring range | 0.6 to 508 mm (0.025 to 20.00 in) |
| Measurement resolution | 0.01 or 0.1mm(0.001 or 0.01in) |
| Millimeter or inch | |
| Display mode | Thickness value mode, min/Max capture mode, difference/reduction mode |
| V path correction | Automatic V path correction compensates for the nonlinearity of the twin probe |
| Measurement update rate | Optional 4HZ, 8HZ, or 16HZ per second |
| Material speed range |
|
| Working language | Chinese/English/French (optional) |
| Alarm set | Max/min alarm, dynamic change thickness reading color when alarm |
| Power supply | Two 1.5V AA batteries |
| Operating time | Two AA batteries, more than 35 hours of service |
| The instrument to turn it off | Optional Automatic shutdown after no operation is performed for 5, 10, or 20 minutes, or manual shutdown |
| -10 to +50 ºC, up to 20 ºC with special requirements | |
| |
| Shelf life | Contain battery 280g |
| 12 Months |
Standard delivery
Main unit TG-5100D
Probe with cable
Carrying case
Instruction manual
Calibration certificate
Optional accessories
| High temperature probe | Cast iron probe |
| Narrow tube probe | Miniature probe |
| Probe cable | Step block |
| Rubber Sheath |
Probe with measuring range
| Probe described |
| Contact area Diameter | Measuring range (In steel) | Allowed ContactTemperature |
| Cast iron probe ZT12 |
|
| ||
| Standard probe PT12 |
| |||
| Standard probe PT08 |
| |||
| Standard probe TC510 |
| |||
| Small crystal tube probe PT06 |
| |||
| Miniature probe PT04 |
| |||
| High temperature probe | Below 480ºC |
