Latex Free Disposable FFP1 Face Mask Smooth Breathing 80% Filter
Efficiency Level
1 . Descriptions
FFP1 Cup Mask use latex-free elastic strap , soft nose liner ,
softer and fit the face,adjustable aluminum nose clip
will make wearing more sealless leakage .Easy-breathing
valve can make breathing more smooth .
2 . Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
1 . Stardard : EN : 149 : 2001 + A1 : 2009
2 . Test Machine : TSI 8130
3 . Test Flow : 95Liters/Min
4 . Test Medium : NACL & DOP
3 . Material of each layer
Outer layer is Protective needle punched cotton.The middle
layde is FFP1 melt blown filter(have filter efficiency level of
80%)
The other middle layde is Active Carbon filter.and the inner layer
is Shaped needle punched cotton
4 . Certification
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in
Annex VII under surveillance of BSI , notified body n°0086.
5. SAFETY PRECAUTIONS
- Read carefully the instructions enclosed with the product before
use.
- For reasons of safety and hygiene, this product is for personal use
only.
- Check carefully that the protection offered by this product are
sufficient for the intended work and for the risks.
- Read carefully the user information sheet enclosed with the product
and the restrictions before use.
- This product does not supply oxygen.
- Use only in adequately ventilated areas containing sufficient
oxygen to support life.
- Do not use this respirator when oxygen concentration is less than
19%.
6 . Advantages
- Polypropylene (P.P.) outer layer provides smooth lining and avoids
loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and
reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and
increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking.
Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the
reliability / regularity of the production and the control of the
environmental impact.