3D Designed Dust Particle Mask Compatible Customized Logo With Protective Eyewear

3D Designed Dust Particle Mask Compatible Customized Logo With Protective Eyewear

1 . Descriptions 

FFP2V Dust Mask Provides respiratory protection against moderate levels of fine dusts and mists. It provides comfort and style without compromising performance. These masks are also popular during epidemic crises such as the ebola outbreak and most recently the coronavirus because they reduced exposure to airbourne particles. The face mask is 3D designed with folded structure to fully cover the nose and mouth in 360 degree for filtering breath air, to get comfortable easy breath and high filtering effect. The non-woven fabric with ≥95% filter effect.

2 . Packing:

• 5pcs/box,12pcs/ctn.
• The disposable respirators available in color box package and blister packaging.
• Blistic package are ideal for the retail sector and trade counters.
• The disposable respirators can be packed in attractive color box with User Manual in.
• The respirators be packed in a poly bag which keeps the masks hygienically clean and allows for better storage and control over dispending in the workplace.

3 . Certification

This product has been tested according to the following European Standard:

    EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.

It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.

    EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

4 . How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

5. Discard and replace the mask if:

• The mask is removed whilst in the contaminated area.
• Clogging of the respirator causes breathing difficulties.
• The mask becomes damaged.
• For respirators protecting against vapours,the smell of vapours present becomes derectable.

6. FAQ

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could I custom the packaging?
A: Yes, of course. You can choose bag packing, box packing or single packing. And we can printing your brand and logo on the packaging.

7 . More pictures