Desiccant heatless air dryer max 30 bar used for fiber laser cutting field by CE/ASEM/ISO9001 system

Heatless Desiccant Air Dryer

Working condition and technical data
Maximum inlet air temperature:45℃
Pressure range:0.5-1.0Mpa
Pressure dew point:-20℃ ~ -40℃
Inlet oil content:≤0.1PPm
Regeneration gas consumption:≤14%
Control mode: microcomputer automatic control / PLC control
Power Supply:AC 220V/50HZ
cycle:T=10(min)
Design condition: inlet temperature: 38 ℃
Ambient temperature: 38 ℃
Working pressure: 0.7MPa
Pressure loss: ≤ 3% of design pressure

Features:

• 10 minutes cycle in the desiccant dryers.

• The pressure dew point of the desiccant dryers can reach - 20 ℃ to - 40 ℃;

• Regeneration gas consumption ≤ 14%;

• High-quality switching valve in the stable and reliable, can ensure the integrity of the working process, prolong the working life of components;

• The activated alumina with high hygroscopicity is selected in the Heatless Desiccant Air Dryer, with uniform shape and size, high strength, high dew point, less dust,
and long service life;

• The amount of regeneration gas can be adjusted according to the operation load demand of the equipment to achieve energy-saving effect;

• Special airflow diffusion device and automatic regeneration in the desiccant dryers, ensure the service life of desiccant;

• Programmable microcomputer controller, adsorption, regeneration working time can be adjusted to achieve your satisfactory dew point value.

Note: other special requirements are welcome to customize.

2.Operating Conditions

Inlet temperature:≤38℃
Ambient temperature:1-45℃
Standard Working Pressure:0.7Mpa
Power:AC220V/1P/50Hz/60Hz

Standard Configuration

PDP:-40℃
Adsorbent life:3 years
Valve with Stainless Steel Core
PLC Control

Optional Configuration

PDP:-70℃
Dew point display and energy saving module
Communication telex function
High temperature and high pressure intake
Galvanized or stainless steel pipe
Tower insulation