Medenstar Co.Ltd |
|
Torque Head High Speed Dental Handpiece Electric , High Performance Dental Drill
Description:
Handpiece With Quick Coupling:M4/B2
Chuck Type:Push button
Bearing:Ceramic bearing
Workign Air Pressure:0.20-0.25MPa(0.22MPa prefrred)
Rotation Speed:350,000-400,000R.P.M(Standard Head);
280,000-320,000R.P.M(Torque Head);
Bur Applicable:Φ1.595-1.600mm
Spray:triple water spray
Product Parts:
Consists of handpiece head, handle, caudal thread, cartridge.
Working Conditions:
1. Air pressure 0.25~0.30mpa,must be filtrated.
2. Use high speed dental bur with shaft diameter
Φ1.59~1.60mm×21-23mm and roghtness less than 0.8um.
3. The amount of handpieces spray or water spray should be able to
adjusted.
4. Hard glass fiber,can be repeatedly sterilized in high
temperautre and pressure.
Product Scope:
Only used for drilling, molar of stomatology clamping high-speed
dental burs.
HPA011QC Handpiece we Provide Three Kind Of Head For Choice
HPA011SQC | HPA011TQC |
Standard Head | Torque Head |
Features:
1. Compatible with 45 degree m-ax handpiece
2. Push button type/key type handpiece
3. clean head system with one hole water spray
4. Torque head and more powerful
5. Unti-retraction
6. Two holes and four holes, can directly use to the dental unit
7. Ceramic bearing from Germany cartridge with more long life
dental high speed handpieces Advantage:
1. Ceramic bearing longer service life,higher accuracy,lower
noise,less vibration.
2. Non-scratch design,comfortable for hand feeling, easy to clean.
3. Quiet operation not more than 65db to protect your hearing.
Our Advantages
* Full way services and technical support offered by our
professional engineers.
* We highly appreciated any types of inquiry and all of them will
be replied in 14 hours.
* Your goods could be shipped to you as your requirement such as by
air or by sea, full way tracking for your cargos offered before the
arrival of the goods.
1. Professional skillfal worker
2. More than ten years experience in this industry
3. Manufacturer/wholesale
4. Various products
5. Quality certificate
Maintenance:
1. Considering safety first, please be careful to use it with full
attention.
2. Be limited to dentists who held the dental treatment
qualifications.
3. Strictly forbid decomposition and reconstruction by
unauthorized.
4. Please run point testing on outside of patients oral beforehand.
If feel anomalies, please stop using immediately and contact with
our after-sales center.
5. When appears abnormal during using, please stop it immediately
and contact with our after-sales center.
6. It will cause a high noise using a center-vibration or bended
bur and a handpiece of which bearing has been worn, A long time in
this state will be harm to people’s hearing. Forbid using a
vibration or bended bur, if appear high noise, please replace the
shaft core early
7. Do not use a bending , cracking, deformation and unqualified
bur. If using it, may cause a snap, or a flying off to injury
accident during operation process.
8. Please ensure the bur chuck be clean. If with contaminant inside
of it, may causes bur clamping weaken or shaft core vibration.
9. Please run the bur under the provision rotation-speed by bur
manufacturers.
10. Do not crash, especially to avoid falling.
11. Please install a bur or a standard stick before using.
12. Aslo remember to install a bur or a standard stick when not in
using.
13. Please unload the bur and handpiece when the running stopped in
completely.