Home Companies ME & WE

0.200mm To 1.000mm Wire Drawing Die Material Shaving Dies

Contact Us

[China]

Trade Verify

Contact name:Zhang

ME & WE

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

0.200mm To 1.000mm Wire Drawing Die Material Shaving Dies

Country/Region	china
Categories	Moulds

Product Details

Wire Drawing Dies, Shaving Dies

1. Description:

If defects are found on the wire surface and they may cause damage to the performance of final products, shaving dies are used to remove (shave off) them.

2. Advantages:

These dies have a long lifespan, they enable shorter preparation time and reduce the amount of wasted wire materials.
The lifespan of these dies is 50 to100 times longer than that of dies made of cemented carbide.
These dies can shave wires to give them superior surface conditions

inches	mm	ADDMA	Maximum Diameter
0.0039-0.0157	0.100-0.400	D6	0.4
0.0079-0.0315	0.200-0.800	D12	0.8
0.0079-0.0394	0.200-1.000	D12	1.0
0.0197-0.0591	0.500-1.500	D15	1.5
0.0197-0.0591	0.500-1.500	D15	1.5
0.0315-0.0787	0.800-2.000	D18	2.0
0.0315-0.0787	0.800-2.000	D18	2.0
0.0472-0.1181	1.200-3.100	D21	3.1
0.0472-0.1181	1.200-3.100	D21	3.1
0.0591-0.1732	1.500-4.400	D24	4.4
0.0591-0.1732	2.000-4.400	D24	4.4
0.1299-0.2126	3.300-5.400	D27	5.4
0.1299-0.2183	3.300-5.800	D27	5.8
0.2008-0.2992	5.100-7.600	D30	7.6
0.3150-0.4331	8.000-11.000	D33	11.0
0.3150-0.4409	8.000-11.200	D30	11.2
0.3150-0.4724	8.000-12.000	D33	12.0
0.3150-0.4921	8.000-12.500	D33	12.5
0.3150-0.5000	8.000-12.700	D36	12.7

Hot Products

0.08mm To 4.2mm Diamond Drawing Dies Diamond Dies For Wire Drawing 10um

Binderless PCD Wire Drawing Dies, Wire Drawing Dies 1. Description: There are two kinds of PCD ...

D6 0.4mm Non Ferrous Wire Drawing Dies Ferrous Die Casting

Wire Drawing Dies for ferrous and non-ferrous wire 1. Description: Polycrystalline Diamond (PCD) ...

0.0024 To 0.0039 Inch Pcd Dies Polishing Wire Drawing Machine Die

Wire Drawing Dies, Single Crystal Diamond Dies, ND, AD 1. Description: Single Crystal Diamond Dies ...

0.35 To 35.0mm Twisting Wire Drawing Dies Stainless Steel Die D12

Wire Drawing Dies, Twisting Dies We provide a variety of grades of high-performance cemented carbide ...

0.200mm To 1.000mm Wire Drawing Die Material Shaving Dies

Wire Drawing Dies, Shaving Dies 1. Description: If defects are found on the wire surface and they ...

D27 Carbide Wire Drawing Dies 0.3mm To 3Mm For Wire Drawing Industry

PCD Tin Coating Dies, Wire Drawing Dies 1. Description: PCD(Polycrystalline Diamond) Tin Coating ...

Related Products