Results formultiscene plug socket coversfrom 19363 Products.
|
STAINLESS STEEL WELDOLET,THREADOLET , ASME B16.11 , MSS SP-79 , AND MSS SP-83 , NPT , SW A182 F304/304L,3"X1" 3000LB Forged Steel Elbow : 45deg, 90 deg, 180 deg. A-182/A105 S/W & ...
|
|
|
|
IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to ...
|
|
|
|
IEC 60884-1-figure 30 Example of test arrangement to verify the fixation of pins in the body of the plug Product details: This device conforms to the standard of IEC 60884-1 Fig30. ...
|
|
|
|
ASME SB366 WP904L-S 1.4539 N08904 Austenitic 90 Degree LR Elbow B16.9 The ASME SB366 is a specification that covers welded grade 904L Stainless Steel Fittings, where the term ...
|
|
|
|
ASTM A105 Carbon Steel Forged Full Coupling NPT 6000LBS B16.11 For Chemical Industry ASTM A105 Carbon Steel Full Coupling is a short piece of pipe or tube having sockets in one end ...
|
|
|
|
Carbon Steel Pipe Fittings, ASTM A234 WPB CS TEE, FLANGE, Elbow Material Composition of ASTM A234 WPB fittings, they are made from carbon steel and have a maximum carbon content of ...
|
|
|
|
ANSI / ASME B16.5 Forged ASTM A105 Carbon Steel Blind Flange ASTM A105 is a standard specification covering forged carbon steel piping components for ambient- and higher-temperatur...
|
|
|
|
IEC60320-1C2 Maximum Pullout Strength Of Gauge For standard gauge inspection and check GB17465.1-2009, IEC60320-1 appliance coupler. Electronic and electrical appliances, ...
|
|
|
|
IEC60884 Figure 13 Device for Checking the Resistance to Lateral Strain Product overview: The device for checking the resistance to lateral strain conforms to the standard of ...
|
|
|
|
AS/NZS 3112:2011 Clause 2.13.7.2 Force for pin bending tester 2.13.7.2 Pin bending test All flat pins of plugs rated up to and including 15 A shall be subjected to a pin bending ...
|
|
|
|
B16.11 Forged ASTM A182 F53 Super Duplex Steel 2507 / S32750 / 1.4410 / F53 Thread Elbow ASME/ANSI B16.11 covers a wide range of forged fittings, including elbows, tees, crosses, ...
|
|
|
|
BS1363-2:1995 figure 18 | Apparatus for Flexing Test Testing Gauge BS1363 British Standards Plug Gauges Name Description QTY (piece) BS1363-2-Fig1 Test PIN 1 BS1363-2-Fig2a.2b ...
|
|
|
|
1N gauge / IEC60884 Figure 10 - Gauge for checking non-accessibility of live parts, through shutters,and of live parts of socket-outlets with increased protection Description: ...
|
|
|
|
IEC60884-1 Fig 44 Clause 19 Temperature Rise Test Equipment 0 - 150° Product Introduction This device is in accordance with IEC60884-1 Fig 44 Clause 19 of the temperature rise to ...
|
|
|
|
ISO5356-1 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge ...
|
|
|
|
EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test ...
|
|
|
|
Flexible Cable Retaining Force Tester Usage: test the compaction capacity of plug wire and check if the plug wire and electric accessories are firm Meet standard: GB 2099.1-2008 ...
|
|
|
|
Coupler Connector Gauge Testing Equipment For Laboratory IEC60320 Product Information: This coupler gauge confirms to the IEC60320.1 standard, it is used for the purpose of ...
|
|
|
|
Coupler Gauge Testing Equipment For Laboratory and Measurement Testing Departments Product Information: This coupler gauge confirms to the IEC60320.1 standard, it is used for the ...
|
|
|
|
40N ± 2N Switch Tester Coupling Implement Shell Pressure Test Device Product Information: This device is according to the IEC60320-1 standard requirement to design. Appliance ...
|
|
|
You may also be interested in :