Active Member
|
[China]
Address: 4thFloor,Jinyun Building A,No. 43,Xizhimen North Street,Haidian District,Beijing,China.
Contact name:Zhang
Beijing Sincoheren Science and Technology Development Co., Ltd |
|
|
Portable Co2 Laser / RF Co2 Fractional Laser / Fractional Laser Co2 machine laser scar removal machine
Brief Introduction
Fractional resurfacing is a new modality for laser treatment that creates numerous microscopic thermal injury zones with controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, allowing for rapid repair of laser induced thermal injury.
This unique modality, if implemented with proper laser delivery systems, enables high energy treatments while minimizing risks.
Application
1. Skin renewal and regeneration
2. All colors tattoo removal
3. Remove all kinds of wrinkles
4. Remove acne and scars
5. Remove neoplasms
6. Remove pigment
7. Treat telangiectasis
8. Sun damage recovery and skin renewing
9. Actenic keratoses
10. Face lift, tighten and whiten skin
11. Pierce ears
12. Effective treatment with skin hydroponic, skin rough
Specification
| Wavelength | 10.6μm |
| Power | 30W |
| Indication beam | Diode laser (532nm,5mW) |
| Micro Pulse Energy | 5MJ ~ 100 MJ |
| Transmission System | 7-Ariculation Joint Spring-Balanced Light Guiding Arm |
| Scanning Mode | Scanning area: min 0.1 ×0.1mm max 20 ×20mm Scanninh graphic: Rectangular, Ellipse, Round, Triangle Handle piece Velocity: 0.1~9cm²/s Scan depth:<2mm Estimated power:24mJ~1000J |
| Continuous | 1~30W,step adjustable per 1W |
| Pulse Interval time | 1~999ms, step adjustable per 1 ms |
| Pulse duration | 90~1000μs |
| Modulation Frequency | 1~999Hz, step adjustable per 1 Hz |
| Cooling System | Built-in water cooling |
| Electrical requirement | 230VAC 50Hz 1000W |
| Dimension(W×D×H) | 430mm×350mm×1050mm |
| Weight | 35kg |
Working Mode
Continuos: Power 1~30W step adjustable each 1 W
Pulse: Power 1~30W step adjustable each 1
Interval time: 1~999ms
Ultra pulse: Power 1~30W step adjustable each 1
Modulated frequency of 1000 Hz
Pulse Duration: 90-1000μs
Scanning mode
Scan mode: Ellipse, Rectangular.
Scanning Range: 15*15mm
Repeat Delay: 0.1s---- 5.0s.
Micro Pulse Energy: 5mJ---50mJ.
Treatment Level: 0.30%-----25.0%.
Passes: 1-----10 times.
Estimated Power: 24mJ--1000J.
Ellipes estimated power: 31mJ----1000J
Rectangular estimated power: 24mJ----981J
Treatment area: 0.1*0.1mm, ----- 20*20mm.
Handpiece Velocity: 0.1-----9cm2/s
Scanning Depth: <1.8mm
