|
[China]
Trade Verify
Address: 4F, BLDG B, GAOCHUANGDE INDUSTRIAL PARK, NO.7, SANHE ROAD, DALANG, LONGHUA DISTRICT, SHENZHEN
Contact name:Cloris Wang
Shenzhen YuanTe Technology Co., Ltd. (Safegas) |
|
Verified Suppliers
|
|
|
Indoor Formaldehyde Gas Detector CH2O Gas 0-10ppm For CDC Environmental Monitoring Station
SKY2000 series gas detector is a kind of fast response and high accuracy gas measurement device. With internal sampling pump, fast sampling speed and high flow rate, ensuring the response time of the detector. Unique design, small size and easy to carry with. Special high intensity engineering plastics housing, suitable for different kinds of situation and environment. We dedicate to provide you the most reliable, accurate and the safest solution of gas detection.
| Gas Detected | CH2O, Formaldehyde | ||
| Detection principle | Electrochemistry | ||
| Sampling Method | Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. | ||
| Measure Range | 0-10ppm | ||
| Resolution | 0.01ppm | ||
| Precision | ≤± 2% F.S. | ||
| Signal Output | High-speed data transmission by USB, available for data downloading and printing(optional function) | ||
| Response Time | ≤10S | Recovery Time | ≤10S |
| Repeatability | ≤±1% | Linearity error | ≤±1% |
| Zero shift | ≤±1%(F.S/year) | Display | LCD dot matrix display |
| Operating language | Chinese/English | Gas unit | Units are switchable |
| Temperature | -40℃~70℃ | Humidity | 0-95%RH |
| Explosion-Proof | ExiaⅡCT4 | Degree of protection | IP66 |
| Alarm mode | Sound, light, vibration | Operating time | 100h(pump off) |
| Dimensions | 205*75*32mm | Weight | 300g |
Functions
Precautions
1.Must open the device in clean air
2.It is strictly forbidden to open the cover and use the instrument on site
3.It is strictly forbidden to replace the sensor with power on
4.Installation, debugging, setting and other operations must be carried out by professionals
5.The calibration check should be carried out regularly, and the sensors that have exceeded the valid period of use and have faults should be replaced in time
6.It is strictly forbidden to shock the sensor with gas higher than the measuring range
7.Prevent the instrument from falling from a high place or subject to severe shocks
8.It is strictly forbidden to expose the instrument to a high-concentration corrosive gas environment to work for a long time to prevent damage to the sensor
