Shenzhen YuanTe Technology Co., Ltd. (Safegas) |
Verified Suppliers
|
|
PH3 Phosphine Monitor CE Explosionproof Single Gas Detector PH3
Sensor With Fumigation Display
The PH3 phosphine sensor has fast response speed and high accuracy. There are different measurement ranges for you to choose from. If you want to test the fumigation process, we always use measurement ranges of 0-500ppm, 0-1000ppm, 0-2000ppm, 0-3000ppm; If you want to detect residue or leakage after fumigation, we recommend using 0-20ppm, 0-50ppm, 0-100ppm. At the same time, the PH3 phosphine sensor has a secondary alarm function. When the concentration reaches the alarm value, the phosphine sensor will give a 360 ° sound and light alarm. Infrared remote control technology, easy to operate, zero calibration.
PH3 Phosphine Monitor Single Gas Detector Specification
Gas detected | PH3, Phosphine | ||
Detection principle | Electrochemistry, sensor and ic are imported from UK, fast response and high precision | ||
Install method | Wall-mounted, piping type, flow-type (according to the detected environment) | ||
Measure range | 0-5ppm, 0-20ppm, 0-50ppm, 0-100ppm, 0-500ppm, 0-1000ppm, 0-2000ppm, 0-3000ppm(Measure ranges are optional.) | ||
Resolution | 0.001PPM, 0.01PPM, 0.1PPM, 1PPM(According to measure ranges.) | ||
Precision | ≤± 2-3% FS for normal sensor, ≤± 1% FS for high precision sensor | ||
Signal output | 4-20mA, 0-5V, RS485, relay(optional) | ||
Response time | ≤10S | Recovery time | ≤10S |
Repeatability | ≤±1% | Linearity error | ≤±1% |
Zero shift | ≤±1%(FS/year) | Display | High-light nixie tube display |
Connection mode | G1/2 external thread explosion-proof flexible pipe | Unit | ppm , mg/m3. unit is switchable. |
Temperature | -20 to 50°C | Humidity | 0-95%RH |
Explosion-proof | II 2G Ex db IIC T6 Gb IP65 | Degree of protection | IP65 |
Alarm | Sound and light | Operating time | 24H |
Dimensions | 180*150*90mm | Weight | ≤2kg |
PH3 Single Gas Detector Characteristics:
1. The PH3 phosphine single gas detector is equipped with a three
wire 4-20mA analog output as standard; Relay output (can control
other devices); Four wire RS485 MODBUS output.
2. The PH3 phosphine gas detector has a unique infrared control
function that allows for non-contact control of the equipment.
3. It can be compatible with various controlled alarm, PLC, DCS and
other control systems, and can be remotely monitored.
4. Explosion proof level: II 2G Ex db IIC T6 Gb IP65
5. It has self calibration function and uses three standard buttons
for on-site maintenance.
6. Detachable probe/gas battery: It is very easy to calibrate and
replace sensors
PH3 Single Gas Detector Funtions:
1. PH3 phosphine monitoring single gas detector monitors PH3
phosphine gas in the environment or pipelines.
2. It has self calibration and zero calibration functions, making
detection more accurate and reliable.
3. Through temperature compensation, gas concentration compensation
can be achieved under different temperature conditions.
4. The infrared controller can remotely control alarm point
settings, zero point calibration, and address modification.
(Optional)
5. It can output one or two on/off signals and drive external
devices such as ventilation fans or solenoid valves. (Optional)
6. Working voltage: 24V DC
7. PH3 phosphine hydrogen monitor single gas detector housing:
die-cast aluminum
PH3 Single Gas Detector Factory information
Shenzhen Yuante Technology Co., Ltd. was established in 2010 and is
a company specializing in the design, production, and sales of
high-end gas detection equipment and systems. It has a history of
16 years. We take "gas detectors" as our core product, targeting
different industries such as petroleum, chemical, pharmaceutical,
energy, environmental protection, electronics, municipal,
agriculture and forestry, home appliances, etc., and have complete
production lines and solutions. After nearly 10 years of rapid
development, Safegas has become an influential supplier of gas
detection equipment and systems both domestically and
internationally.
Shenzhen Yuante is a group of industry experts with rich experience
in the research and development, manufacturing, and investment of
gas detectors. Shenzhen Yuante invests 5% of its annual revenue as
a research and development fund. Selecting these new products,
technologies, and services that meet market demands is the most
important task for the R&D team.
In terms of manufacturing, we have independent production
workshops, modern production equipment, aging rooms, calibration
rooms, and professional employees.
In terms of marketing, we implement flexible and competitive
pricing and diversified sales strategies. We penetrate the market
through various methods such as OEM, ODM, agency, and direct sales
to ensure the profit of every partner.
In terms of service, we provide users with 24/7 service, quick
response, adequate technical guidance, and convenient maintenance.
At present, the detector has passed ATEX CE EMC international
certification, and the company has passed ISO9001-2015 quality
management system certification.
FAQ
Q1: What about the payment method?
A1: Credit card, T/T and Paypal are available for PH3 phosphine gas
detecto.
Q2: Are you factory or trade company?
A2: We are factory. We are a professional PH3 Phosphine Monitor Single Gas Detector manufacturer with 16 years experiences.
Q3: What about after-sale service?
A3: 12 months warranty or 24 months warranty for PH3 Phosphine Monitor Single Gas Detector.
Q4: What is your delivery time?
A4: PH3 Phosphine Monitor Single Gas Detector is1-2 days on receipt of payment.
Q5: Does your company accept customization?
A5: We do customizing service for customers.
Company name, logo and contact information can be put onto our detector and user manual.
Other languages can be customized.
Q6: What about the Shipment?
A6: We’ll choose proper transportation mode based on the weight of
PH3 phosphine gas detector, usually arrange shipment byair express
such as DHL,FEDEX,TNT or UPS.
Shipping is about 5-7 days.