Active Member
|
[China]
Address: Baisha Village, Changshengqiao Town, Nan'an District, Chongqing, China
Contact name:Bob
Chongqing Yonghan Machine Processing Co., Ltd. |
|
|
Honda NXR150 Motorcycle Clutch Housing 67 Teeth
Clutch housing. This is what gets turned by the crank. The tabs from the friction plates locate in the gaps.
The clutch is one of those devices that we use all the time but barely think about. In theory it’s so simple - it’s just a method of allowing the rider to disengage the power from the rear wheel, so the engine can spin while the bike sits still.
But in the early days of motorcycling some bikes didn’t bother with clutches and if you ever get a chance to ride one it’s worth doing. Ye Gods they’re tricky. Every start is a bump start and stopping entails either stalling, or lifting your weight off the saddle so the rear tyre can gently spin (they weren’t big on tyre traction in them days). Plus of course, there are no gears - you can’t have them without a clutch.
Most motorcycle clutches are manual (ie not in an automatic gearbox), wet (they run in oil) and multi-plate (multiple friction surfaces are used), so let’s look at those. The basic idea is that the power from the engine turns a disc shaped like a big washer with a large hole in the middle. That’s a clutch plate. If the rider wants the power to go to the back wheel they let out the clutch lever, which allows springs to push the plate onto another plate that is connected to the rear wheel via the gearbox and chain. As friction between to two plates builds up, so more power is transmitted to the rear wheel, until the plates are locked and maximum power goes from engine to tyre.
It gets complicated with bikes because space is so tight in across the frame 4-cylinder engines. If you were to have just two clutch plates, they would have to be massive to have enough surface area to create the friction necessary to transmit the power. So most bikes have multi-plate clutches.
The replacement and repair of motorcycle clutch need to dismantle the engine box, which is complex and time-consuming.The existing maintenance market often has the phenomenon that the unqualified clutch can not be used or the service time is very short, and it is not durable.It is time-consuming and laborious for repeated disassembly and repair, which seriously affects the user experience and the work efficiency of the repair technician.
In order to avoid this kind of phenomenon, our company launched "Yonghan" brand upscale products!The qualified rate of products will reach "one hundred percent", and the normal service life of each product will be extended by 30%!At the same time, the products have super high cost performance ratio, which makes users feel at ease and the repairmen feel comfortable.
Product detail:
| Product Name: | Honda NXR150 Motorcycle Clutch Housing 67 Teeth |
| Model No.: | NXR150 |
| Materials: | ADC12 & Cr |
| Adaptable vehicle: | HONDA |
| Distinguishing feature: | These products can stand wear and tear with long service life. |
| Main Market | Southeast Asia |
| Certificate | ISO9001:2008 |
| Package: | Normal Export package, and if customer have special request on packing, we can do accordingly |
| Delivery time: | 5-7 days according to detailed order |
| Payment: | 30% deposits, 70% balance before shipment |
YH brand clutch advantage:
1.Factory original selling YH NXR150 motorcycle clutch and accessories;
2.Friction materail from Taiwan;
3.can be widely use on many different contries;
4.We have more than 21 years experience on clutch produce;
5.Most of the clutch parts produce by our own,the quality control is very effective.
Other models we can provide:
| REGI0N | MODEL | |||
| Brazil | CB300 | FAZER250/LANDER250 | TITAN95/99/CG83 > TODAY/CBX200/TITAN2000 | YBR125 ATE 2014 /XTZ125 ATE 2014 |
| YBR125/FACTOR 125 | TITAN150 2004/BROS150>2006/FAN150/FAN125>2009 | TITAN CRF230 | TITAN 150 05>14/ FAN 150/FAN 125>09/ | |
| CBX 250 TWISTER | CG 125/TITAN/FAN 83>08 | |||
| Indonesia | GRAND | LAGENDA | KARISMA | REVO |
| JUPZTER Z 18T | JUPZTER Z 24T | JUPZTER Z 20T | KAZE | |
| FORCE-1 | JUPITER Z | SMASH | LC135 JUPITER MX | |
| SHOGUN | SHOGUN-I | KAZE | SPARK | |
| JUPZTER Z 21T | CRYPTON | JUPITER Z1 VEGA ZR | ||
| Malaysia | LC135 | SRU115 | SRL115 F1 | SRL110 |
| LAGENDA | KARISMA | Y110/100 | C70-8 | |
| GN5 | ||||
| South America | CD100 | CG125 | CG125-5P | AX100 |
| CB125 | AT110 | BAJAJ135 | TITAN /STORM /BROSS /XLR/BX150 | |
| YBR125 | SMASH | SMASH BIT | WAVE | |
| BM150 | V80 | YB100 | CG125N/M | |
| BAJAJ100 | TITAN 150 | RX150 | TITAN125 | |
| Africa | AX100 | CG125N/M | CG125O/M | YB100 |
| CD110 | CRYPTON | VEGAS | SPARK | |
| DX100 | ||||
| Thailand | WAVE110 | WAVE125 | Y100 | DREAM C100N |
| AX100 | GN5 | DREAM | ||
Strandard exporting carton box packing:
Step1: Use plastic bag packing
Step2: Put it into a small carton box,one pcs one box
Step3: Put the small box into big carton box,one box 16pcs
Step4: Put the big carton box on the tray
Step5: Move into the ware house,waiting for deviery
Step6: Delivery to the guest.
Product Display:
FAQ:
1. About the price. Is this the final price?
The price is not the final price, It can be changed according to your quantity or package. When you are making an inquiry, please let us know the quantity you want.
2. Can I buy one of your products for samples?
Most of the samples are free. but the air freight is collect or you pay us the cost in advance
3. How could I know if the products version suitable for my market or not.
Tell me which products you are interested in, I will show you more detail images and information.
4. How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit.
We respect every customer as our friend and we sincerely do business and make friends with them.
Factory Show:
Exhibition:
