1 Head Fan Coil Winding Machine , 2 Poles Induction Motor Winding Machine

Ceiling Fan Coil Winding Machine has two working stations. Controlled by micro computer, it could achieve auto winding, auto array, auto indexing; array and indexing is controlled by stepping motor, winding is controlled by frequency converting motor, turn number could be accurate up to 0.1 round.

Vertical coil winding machine is with 1 winding head and 2 turnable operation station. The system automatic put the coil into transfer former orderly; The machine is especially suitable for winding the coil which used in high slot filling rate, narraw slot opening stator; winding mode such as automatic skip, automatic cut and automatic indexing can be finished at a time successively. parameter can be set in HMI and tension can be settable. 

Application:

This coil winding machine is suitable for 2 poles, 4 poles and 6poles coils winding.

Machine main function and characteristic

Winding tooling: each machine has one set winding tooling and three vertical winding forms.

The whole set of tooling can be changed, and it takes about 15min.

The turntable is two stations structure. It adopts servo system to rotate and index transfer form.

Allow three wires winding simultaneously.

Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn.

The working rotation speed can be set . Machine has no distinct vibration and noise.

Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop.

PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed and winding direction.

X andY spindle of wire hooker and wire cutter adopts servo system. It can adjust the length of bridge wire and lead wire.

Tooling sunk adopts servo system. The max segment number of tooling sunk is 6.

Parameter: 

Also, you can choose low cost coils winding machine WD-PR-160

and the higher efficiency multi heads vertical coil winding machine too as 4 heads etc