1756-DNB Ethernet Communication Module FW 6.002 Allen Bradley

1756-DNB/E Ethernet Communication Module FW 6.002 Allen Bradley

The 1756-DNB scanner module supports DeviceNet node addresses 00...63. The factory default setting is node address 63.

Use the switches to select any network address from 00 through 63. When the switches are set outside of this range (except for 888), you can configure the node address with RSNetWorx for DeviceNet software. When all three switches are set to 8, the 1756-DNB scanner module will reset to factory default settings at powerup.

Change the node address by setting the rotary switches or commissioning the 1756-DNB scanner module in RSNetWorx for DeviceNet software.

When all three switches are set to 8, resets the 1756-DNB scanner module to factory default settings. Do not use it for normal operation.

Other Related Parts 

More Detail Find Below

Other Brand For Example

Honeywell, Allen Bradley,  Bently Nevada, GE Fanuc, ABB, ICS Triplex, Schneider, Foxboro, Triconex, Emerson, Ovation, Yokogawa, Siemens, Fuji, Bachmann,...