Active Member
|
[China]
Address: 4th floor, 1st Building, Zhiheng Industry Park, Guankou 2nd Road,Nanshan District,Shenzhen,China 518000
Contact name:Andy Chen
Shenzhen Unistrong Science & Technology Co., Ltd |
|
|
4G OBD car rent GPS tracker GPS GSM Car Alarm And Tracking System
car sharing solution software smart t box
Product feature
1. Remover alarm function : Alram when power cut off or GPS antenna
removed
2. Remote configuration clear blind area data, different alarms parameters, sudden deceleration, sudden turn, through platform by send GPRS command
3. Built in battery: 3.6V/550mA NiMH battery
Product feature:
| Product appearance | ||||||
| Type | Detail | Standard configuration | ||||
| Dimension | 135.7*82.35*30mm | |||||
| Indicator | Indicators | 1:POWER indicator red 2:GPS indicator green 3:4Gindicator blue 4:CAN indicator yellow | ||||
| Hardware configuration | ||||||
| Type | Detail | Standard configuration | ||||
| CPU | model | CPU core 72MHz,M3 kernel,FLASH 512KB,SRAM 64KB | ||||
| GNSS | BDS L1/GPS L1 Centimeter-level navigation RTK positioning module | |||||
| positioning accuracy | single point:2.5m RTK:0.025m+1ppm CEP50 | |||||
| Capture sensitivity | -145dBm | |||||
| Tracking sensitivity | -160 dBm | |||||
| speed | 0.1m/s | |||||
| Initialization time | 90S | |||||
| Data update rate | 1Hz(default),2Hz | |||||
| Position time | cold start:<32S typical(open sky) hot start:<1S | |||||
| Communication module | 4G CAT1 | model | Quectel EC200S-CN,CAT1,DL max(10Mbps);UP max :5Mbps | |||
| Frequency | LTE-FDD: B1/B3/B5/B8 LTE-TDD: B34/B38/B39/B40/B41 GSM: 900/1800 MHz do not support (China telecom 2/3G and China mobile 3G) | |||||
| battery | built in | 3.6V/550mA NiMH battery | ||||
| built in storage | 4MByte | 4Mbyte-SPI Flash,Resume transfer | ||||
| OTA | Software | Support OTA updare； platform and protocol provided in advance | ||||
| Sleep, wake up | Software | sleep status, wake up by ACC/G-Sensor etc. | ||||
| remove alarm | Software | Alram when power cut off or GPS antenna removed | ||||
| ＣＡＮ protocol | ||||||
| Type | Detail | Standard configuration | ||||
| CAN | CAN | Support ISO15765 & SAEJ1939 | ||||
| Interfaces | ||||||
| Type | Detail | Standard configuration | ||||
| interfaces | SIＭ card | inside device | ||||
| GNSS | GNSS RF SMA *1 | |||||
| GPRS | GPRS RF SMA *1 | |||||
| power interface | 7PIN male head | |||||
| Standard accessory | ||||||
| Type | Detail | Standard configuration | ||||
| Power cable | power cable | 7PIN female head,1*CAN,1*RS232,B+,B-,ACC,loose wire on the other side | ||||
| GPS/BD antenna | external | high precision RTK antenna | ||||
| 4G antenna | external | Pen antenna | ||||
| Installation method | fix by screws | |||||
| Reliability | ||||||
| Type | Detail | Standard configuration | ||||
| Environmental/vibration standard | IP rate | IP65 | ||||
| working temperature | -30℃--+70℃ | |||||
| storage temperature | -40℃--+85℃ | |||||
| humidity | 95%RH(+40℃),48 H | |||||
| ESD | Contact discharge:±8KV air discharge: ±15KV | |||||
| vibration | EP455 section 5.15.1 | |||||
Service
1. Standard free 1 year warranty for the product;
2. Sample test and debug and technical support;
3. ODM/Customized requirements assessment and quotation;
4. Product ID design ;
5. For certain quantity order, free spare parts support;
6. We have an active team with more than 30 R&D engineers, we will provide qualified service throughout the process.
7. Testing and installation guidance available for all buyers.
8. Free technical training for regional agent if necessary.
FAQ
1. Question: How to contact you for detail information?
Answer: You can contact us through "Contact" button. Or you can write email to us at: mk.hu@unistrong.com
2. How fast you could make the delivery?
Answer: 2 weeks for standard configuration; And if the product are customized, the delivery date will be longer according to materials status.
3. Q :Are you manufacturer?
A: Yes, we are manufacturers.We can provide OEM / ODM customized service according to our customers’ various application and demands.All of our products are fully patented, ID/MD design, hardware and software,mold,assembly are done by our own team.
4. Q: Would you provide SDK for me?
A: Yes, we offer free SDK if you order sample.In addition, we also have support engineers to assist you with software development.
