Epistar Chip 100W LED High Bay Light(MJ-HB04-N100)

Features Of LED High Bay
.The light source adopts the integration of imported single high power LED, with the special design of integrating many chips into one lighting source.

.Integrative design for heat sink and housing; The LED is closely connected to the surface. The heat from the LED is removed through the heat dissipation wing and also by air ventilation. This ensures 50,000 hours life-span for the LED. If it works 11-12 hours per day, it can work over 10 years.

.The high pure imported aluminum from Germany as the reflector has high reflecting efficiency, and it can make sure the luminous flux, controlling the light inside of a useful area. It improves the efficiency of light uniformityuniformity and utilizationutilization, showing the LED advantage of energy saving.uu

.New high efficiency constant current driver. Wide range of input voltage: AC85-265V.

.Can present the original color of the objects, it has varies of colors to choose which can meet the requirements in different environments. It eliminates the dullness of environments caused by the lower color temperature, like sodium lamp, or higher color temperature, like mercury lamp. This could satisfy the feeling of those who appreciate the lighting.

.No delay start. No waiting. It can reach its normal light as soon as it is turned on. No noise.

.Obvious power-saving efficiency. Use powerful LED light source and high efficiency imported LED driver. Compare with sodium lights, it can save electricity around 60%.

.Environment friendly and no air pollution. We exert the design of using cold light source. It’s no heat radiation. There is no ill to our eyes and skin. The floodlights do not have lead, hydrargyrum and any other contamination. It is really environment friendly with ROHS certificate

Safety Notice for Using
◆Please always use the light out of its package.
◆Before starting use of the light, please check if the light was damaged during transportation. If any damage has occurred, please DO NOT install or use it.
◆Any maintenance should be performed by trained professionals only.
◆Keep packaging materials away from the reach of children.
◆Caution, the packaging contains small parts that may be swallowed by children.
◆Never leave children unattended in the vicinity of the lights and do not allow them to play with electrical devices.
◆Try to avoid looking directly in the LED beam-especially for extended periods of time. DO NOT shine the LED light in another person’s eyes.
◆Never cover the light by other objects.

Maintenance:
◆Prior to cleaning the light, make sure it has been disconnected from the power supply.
◆Use a dry or slightly moistened cloth for cleaning.
◆Never use any chemicals or abrasives for cleaning.

Proposal:
Used electronic devices must be collected for recycling and can not be deposited together with general rubbish.

Installation:
◆This product should be installed by trained electricians.
◆Check integrality of the products when unpacking.
◆When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces. Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights. DO NOT kink cables. Output cables should be laid separately and at a distance from other cables.
◆Proceed by connecting the wiring cables to the luminaries. Usually, the brown(or black) wire is the live wire, connect it with the terminal marked “L”. The blue wire is the Neutral wire, connect it with the terminal marked “N”.
◆Used only the LED driver included, and do not connect the surface-mounted lights to other loads.
◆DO NOT remove the name plate of the power supply or driver of the light.

Notes:
 Non-professionals are not allowed to disassemble and maintain the products. We have the right not to provide after-sale service if unauthorized disassembly and maintenance happens to the products.