Home Companies Shenzhen C.X.T.Technology Co., Ltd.

Scrypt Asic Miner Machine , Ltc Dogecoin Bitmain Antminer L3+ 504m With Psu

Shenzhen C.X.T.Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: 1625, Huishang Center, Jiahui New City, Futian District Shenzhen Guangdong China (mainland) 518000

Contact name:fiona

Inquir Now

Shenzhen C.X.T.Technology Co., Ltd.

Scrypt Asic Miner Machine , Ltc Dogecoin Bitmain Antminer L3+ 504m With Psu

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

PRODUCT DESCRIPTION

Bitmain Antminer L3+ 504m With PSU LTC Litecoin dogecoin Scrypt mining LTC Asic Miner Machine

 

Specification
 
Product Name
Antminer L3+ 504m
Algorithm
Scrypt
Hashrate
504M
Power Consumption
800W
Top CoinLitecoin
Size188 x 130 x 352mm
Weight4.4kg
Noise level70db
Fan(s)2
Power800W
Voltage11.6 ~ 13.0V
InterfaceEthernet
Temperature5 - 40 °C
Humidity5 - 95 %

 

About this miner

 

Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
Compatible Coins: Litecoin and any other Scrypt-based coins.
Power Consumption: 800W (±10%) at the wall.
Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
Chip quantity per unit: 288 x BM1485.
Rated Voltage: 11.60 ~13.00V.
Operating Temperature: 0C to 40C.
Network Connection: Ethernet (cable not included).

Notes:
1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
2. Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4. Power supply unit is NOT included. Bitmain recommends the APW3++ power supply for the AntMiner L3+.
5. AntMiners are LOUD. The L3+ sounds like a vacuum and is not recommended for use within homes. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee.
Compatible Coins: Any coin based on the Scrypt algorithm. There are many dozen coins, but the most well known is Litecoin.

 

How about the Warranty?

For all the miners new and used If it is within the warranty period, the original factory of the miners will be responsible for it. If it is out of warranty, we will provide paid maintenance service. Normally after-Sales maintenance service of brand new miners starts from the date of delivery by the manufacture factory within 180 days.

 

The following conditions will invalidate the warranty

1.The mining machine itself is dismantled, and the components are changed and replaced.

2.Damage caused by lightning strikes, voltage surges, inferior power supplies, etc.

3.Ingress of water, circuit boards and components are affected by moisture and corrosion;

4.The circuit board has burnt marks or the chip is burned;

5. overclocking.

 

 

How about the Warranty?


A.180 days warranty for new machine.If it is within the warranty period, the original factory of the miners will be responsible for it. If it is out of warranty, we will provide paid maintenance service

 

B.For used miners,we will send testing video with SN code before shipment to make sure every miner is in a good state. And we will provide paid maintenance service after that.

Hot Products

PRODUCT DESCRIPTION Goldshell HS-BOX 235GH/s 230W HNS HandShake miner Asic Miner Machine Specificati...
PRODUCT DESCRIPTION IPOLLO B1 85t Bitcoin mining machine BTC Asic Miner Machine Specification ...
PRODUCT DESCRIPTION IPOLLO V1 3600mh 3600mh/s V 3.6gh mining Ethereum Asic Miner Machine Specificati...
PRODUCT DESCRIPTION IPOLLO V2 5400mh v 5400mh/s 5.4gh Eth mining Ethereum Asic Miner Machine ...
PRODUCT DESCRIPTION Bitmain Antminer L3+ 504m With PSU LTC Litecoin dogecoin Scrypt mining LTC Asic ...
PRODUCT DESCRIPTION Bitmain Asic Miner Machine , Antminer L7 9.5gh 9.16gh Doge coin Litecoin Scrypt ...