|
[China]
Trade Verify
Address: No.105, Building 6, West Zone, Gaofeng Auto Parts City, No.58 South Section of Dongshi Road, Changsha, Hunan Free Trade Zone
Contact name:Wang
Hunan Ruziniu Construction Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
60251436 Sany Hydraulic Filter SY485/SY500 Apply To 6UZ1/6WG1 Engine
A Sany hydraulic filter is a component of the hydraulic system in Sany heavy equipment such as excavators, cranes, and concrete pumps. The hydraulic system uses fluid to power the equipment's various functions, such as lifting, digging, and moving materials.
The hydraulic filter is designed to remove contaminants such as dirt, metal particles, and other debris from the hydraulic fluid. This helps to protect the hydraulic system from damage and prevent premature wear of components such as pumps, valves, and cylinders.
Sany hydraulic filters are typically made of a pleated paper or synthetic material that is designed to capture particles of various sizes. The filter is typically located in a housing that is easily accessible for inspection and replacement.
Regular inspection and replacement of the hydraulic filter is important to ensure that the hydraulic system is receiving clean fluid and operating efficiently. A dirty or clogged filter can restrict fluid flow, reducing system performance and increasing the risk of equipment failure.
Sany and other manufacturers typically provide guidelines for hydraulic filter replacement and maintenance in their equipment manuals. The recommended replacement interval may vary based on factors such as operating conditions and the type of environment the equipment is used in.
Proper maintenance of the hydraulic filter and other hydraulic system components is important to ensure that the equipment operates reliably and efficiently. This can help to reduce downtime and repair costs, as well as increase productivity and the lifespan of the equipment.
Filter replacement cycle
Air cleaner
Under normal circumstances every 250/ hour clean once, compressed air pressure can not exceed 0.2~03MPa air gun and filter keep 5cm(cm) do not use gasoline or water wash brush.In general, replacement is usually recommended every approximately 500 hours worked.The replacement period of equipment that often works in harsh environments should not exceed 250 hours.(Desert, tunnel, dust heavy construction site, etc.)
Oil filter
Oil filter element is generally replaced once every 250~500 hours
Diesel filter
The service life of the diesel filter should not exceed 500 hours
Hydraulic oil filter
The recommended replacement time of oil inlet/oil suction filter element is 2000-3000 hours
The rated flow rate of oil return filter element/pilot filter element/pipeline oil return filter element is 40-400L/min;The recommended replacement time is 500 hours
