|
[China]
Trade Verify
Address: Shenglong block, high tech zone, Zhengzhou, China
Contact name:Wilson Shi
Henan Ascend Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Product Introduction
The flotation machine is mainly used for sorting non-ferrous metals such as copper, zinc, lead nickel and gold, and can also be used for rough selection and selection of ferrous and non-metal.It is subject to coarse separation, swept separation, fine separation and flotation, so the useful ore are reclaimed.
Working principle
The flotation machine driven by motor revolves the impeller and this will bring the centrifugation and negative pressure. In this condition enough air will mix with the slurry and at the same time the slurry and chemical will mix very well to make the mineral adhesion to the bubble.The height of flash board can be adjusted to scrape useful bubble .
Application
Application: This flotation machine is widely used in rougher flotation ,fine flotation and reverse flotation for nonferrous metal,ferrous metal and nonmetal minerals like copper.lead,zinc,nickel and molybdenum etc.The flotation machine also can he used for concentrating of coal, calcium fluoride and talcum.
Features
The circulation of mineral slurry is reasonable,and can avoid the disposition of coarse sand to the largest extent;
There is a self-control device on the surface of mineral slurry,so it is easy to adjust it.
Techinical parameters
| Model | Volume (m3) | Cell size (mm) | Impeller Dia. (mm) | Impeller speed (r/min) | Capacity (m3/min) | Power (kw) | Singe cell weight (kg) |
| XJ-3 | 0.35 | 700× 700× 700 | 300 | 483 | 0.18-0.4 | 2.2/0.55 | 430 |
| XJ-6 | 0.62 | 820× 900× 850 | 350 | 400 | 0.3-0.9 | 3/1.1 | 755 |
| XJ-11 | 1.1 | 1100× 1100× 1000 | 500 | 330 | 0.6-1.6 | 5.5/1.1 | 1416 |
| XJ-28 | 2.8 | 1750× 1600× 1100 | 600 | 280 | 1.5-3.5 | 11/1.1 | 2113 |
| XJ-58 | 5.8 | 2200× 2200× 1200 | 750 | 240 | 3--7 | 22/1.5 | 3400 |
| SF-0.37 | 0.37 | 700× 700× 750 | 296 | 386 | 0.2-0.4 | 1.5/0.55 | 468 |
| SF-0.7 | 0.7 | 820× 900× 950 | 350 | 400 | 0.3-0.9 | 3/1.1 | 805 |
| SF-1.2 | 1.2 | 1100× 1100× 1100 | 450 | 312 | 0.6-1.2 | 5.5/1.1 | 1373 |
| SF-2.8 | 2.8 | 1700× 1600× 1150 | 550 | 268 | 1.5-3.5 | 11/1.5 | 2138 |
| SF-4 | 4 | 1850× 2050× 1200 | 650 | 220 | 2--4 | 15/1.5 | 2582 |
| SF-8 | 8 | 2200× 2900× 1400 | 760 | 191 | 4--8 | 30/1.5 | 4129 |
| SF-10 | 10 | 2200× 2900× 1700 | 760 | 191 | 5--10 | 30/1.5 | 4486 |
| SF-16 | 16 | 2850× 3800× 1700 | 760 | 191 | 5--16 | 30× 2/1.5 | 8320 |
| SF-20 | 20 | 2850× 3800× 2000 | 760 | 191 | 5--20 | 30× 2/1.5 | 9828 |
Working Sites
You May Also Like
Ball Mill Jaw Crusher Hammer Crusher
2-Roller Crusher Cone Crusher Impact Crusher
Company Profile
FAQ
Q1. Are you factory or trading company?
We are factory specialized in manufacturing stone crushers,
grinding mills, beneficiation equipments and other mining
equipments. Our office and factories are based in Zhengzhou, China.
Because we are factory, so we can guarantee the machine quality and
we can give you very competitive factory price without extra agent
cost.
Q2. To which country your products have been exported before?
In Africa, We have exported to Sudan, Kenya, Zambia, Ethiopia,
Zimbabwe, Guinea, Nigeria and so on. We also exported South Africa,
Chile, Peru, Ecuador, New Zealand, America, Austrilia more than 160
countries. Our equipment and service have won very high reputation
in these countries.
Q3. How will you help the customer install the equipment?
We will send our senior engineer to your place to guide the
installation and commissioning.
Q4. How about the wear parts supply?
We offer wear parts to our customer with our most favorable price.
If there are problems you could not handle, we will send our
technicians to your place.
Q5.What about the payment method?
T/T, Paypal, Western Union, L/C is available
Q6.What about after-sale service?
12 months warranty for all kinds of products; and you will get our
7*24h online service.
Contact Us
