|
[China]
Trade Verify
Address: 4-1, Tonglianshun Industrial Park, No. 8, Chuangxin Avenue, Qianchuan, Huangpi District, Wuhan, China
Contact name:Dai
Wuhan Ruiming Experimental Instrument |
|
Verified Suppliers
|
|
|
Lab Plastic Polymer Compounding Parallel Co-Rotating Twin Screw Extruder
Brief Introduction of SJZS Series Lab Plastic Polymer Extruder
SJZS series conical twin-screw extruder have temperature-controller, vacuum exhaust device, suitable for the production of pipes, sheets and profiles. It has forced extrusion, high-quality, wide adaptability, long life, small shearing speed, material not easy broken down, good mixing performance, powder direct molding and so on.
| Screw: | Two Screw | Screw Diameter (mm): | 10/30 |
|---|---|---|---|
| Screw Thread Length (mm): | 190/250 | The Screw Rotation Speed (rpm): | 51 |
| Main Motor Power( Kw): | 1.5 | Size (mm): | 800X350X580 |
Parameters of SJZS Series Lab Plastic Polymer Extruder
| Key Technical Parameters | SJZS-7A | SJZS-10A | SJZS-10B | SJZS-10Z |
| Screw diameter (mm) | 7/25 | 10/30 | 10/30 | 10/30 |
| Screw thread length (mm) | 190 | 190 | 250 | 190 |
| The screw rotation speed (rpm) | 70 | 51 | 51 | 51 |
| Barrel form | Can open | Can open | Can open | Can open |
| Main motor power( kw) | 0.55 | 0.75 | 0.75 | 0.75 |
| Circulating extrusion dosage (g/per time) | 5-10(manual control) | 15-18(auto control) | 15-18(auto control) | without |
| Direct extrusion dosage (max kg/h) | 0.45 | 1.5 | 1.5 | 1.5 |
| Heating temperature (max ℃) | 450 | 450 | 450 | 450 |
| Feed 1 power (W) | without | 25(optional) | 25 | 25 |
| Feed 2 power ( W) | without | without | 25 | without |
| Power of vacuum exhaust and dehumidification device (W) | without | without | 180(optional) | without |
| Nitrogen protection | have | have | have | have |
| size (mm) | 800X350X580 | 800X350X580 | 850X350X580 | 800X350X580 |
| Key Technical Parameters | SJZS-20 | SJZS-20A |
| Screw diameter (mm) | 20/40 | 20/53 |
| Screw thread length (mm) | 390 | 480 |
| The screw rotation speed (rpm) | 0-50 | 51 |
| Barrel form | Do not open | Do not open |
| Main motor power( kw) | 1.5 | 2.2 |
| Circulating extrusion dosage (g/per time) | without | without |
| Direct extrusion dosage (max kg/h) | 6 | 6 |
| Heating power (kw) | 4.5 | 5 |
| Feed 1 power (W) | 25(optional) | 25 |
| Feed 2 power (W) | without | 25 |
| Power of vacuum exhaust and dehumidification device (W) | 250(optional) | 250(optional) |
| Nitrogen protection | have | have |
| Size (mm) | 1020x450x600 | 1120x450x600 |
